There are many of wireless earbuds on the market right now, some of which are almost absurdly cheap.
However, purchasing an off-brand pair of earbuds can be risky.
That’s one of the things that makes the new Beats Flex wireless earbuds so appealing.
They provide simple AirPod-like capabilities for iPhone users for $50, but their USB-C charging makes them important for Android users as well.
Sometimes, you may have issues charging your beats headphones. So we have written this guide to help you with your technical issues.
Quick Answer, How to Charge Beats Headphones?
To charge your headphones, use the provided micro USB cord to connect them to a power source. The Fuel Gauge LEDs flash while the headphones charge. When the charging is finished, all five lights remain on.
Press and release the power button to see the Fuel Gauge, which displays the battery level and charging status.
After 2 hours of charging, your headphones can play for up to 12 hours.
Plug in the RemoteTalk cable to use your headphones in wired mode to save battery or to use your headphones when the battery is low.
The Beats Flex is the successor to the BeatsX, which initially cost $149 when it was released. The Flex has a similar configuration to its predecessor, with the earbuds connected by a wire that is meant to be draped over your neck.
They don’t charge inside a case like genuine wireless earbuds because they’re connected by a cord. Instead, a USB-C connection on the cable lets you to connect them to a charger or computer immediately.
Here are the Steps to Charge your Beats Headphone
Check the status of your battery. When your headphones are not plugged in, you may monitor the state of your battery life by utilizing the Fuel Gauge LED lights. On the right earphone, the LED lights are located beneath the power button. The LED lights signify the following: 
- A full or nearly full battery charge is shown by five white lights.
- The presence of one red light indicates that the battery charge is low.
- One flashing red light indicates that the battery is nearly depleted.
- The absence of lights indicates that the battery is depleted.
Plug the charging cord into the right earphone. Connect the charging cord that came with your headphones to the micro-USB connector on the right side of the headphones.
Plug in the charging cord to the power adapter. Connect the charging cable’s other end to the USB connection on the AC adapter that came with your headphones.
You may also connect the charging connection to a free USB port on your desktop or laptop computer. This method, however, may take longer to charge your headphones.
Insert the AC adapter into a wall outlet. Connect the charging cord from your headphones to the AC adapter and plug it into an electrical socket. Allow roughly 2 hours for your headphones to charge completely.
If your headphones aren’t charging, try a new charging cable. If it doesn’t work, you can reset the headphones or use a computer to check for firmware changes.
Two Ways to Charge your Beats Wireless Headphones
- Connect the charging cord to the right earcup’s micro USB port.
- Connect the USB end of the cord to a power supply.
Using the AC adapter, it takes roughly 2 hours to fully charge a dead battery. If you’re charging through USB from your laptop or another device, it may take a little longer.
Any adapter with a USB female connector can be used, as long as the other end of the cable has a male android connector.
Wearing earbud while charging your phone puts you at danger of brain injury due to radiation emissions and the conductivity of electricity.
Using your earbuds for calls WHILE NOT CHARGING, on the other hand, is recommended because it helps minimize the quantity of radiation that enters your head.
You can also apply this tip if you have a powerbeats pro, beats solo, beats powerbeats, true wireless earbuds, wired headphone, studio3 wireless, bose quietcomfort, beats x or even your apple airpod, apple watch, android device, and apple device to make sure that you don’t damage your brain, hence, will let you continue to listen to a good sound quality, make phone calls without any noise, call siri anytime!
How can I tell whether my beats are charging?
Status of the battery
- 5 white lights indicate a full or nearly full charge.
- One solid red light indicates a low charge.
- One flashing red light indicates that the battery is nearing the end of its life.
- No lights indicate that the headset has been turned off or that the battery is not charged.
Final Thoughts on How to Charge Beats Headphones
It’s worth noting that the Beats Flex costs $50 and includes a charging wire that works well and provides 90 minutes of play time after only 10 minutes of charging. It does not, however, include a charging cable, as do the iPhone 12 variants.
So, if you don’t have a computer with a USB-C out port or a USB-C brick, you won’t be able to charge the Flex once the battery is drained. If this is the case for you, you’ll need to add in the cost of a charger, which reduces the $50 price tag slightly.
I hope that we are able to help you in some ways o how to charge your beats headphones!
Frequently Asked Questions (FAQS)
What is the best way to tell if my beats are charging?
When not connected to a power source, 5 white lights indicate a full or near-full charge.
One solid red light indicates a low charge.
One flashing red light indicates that the battery is nearing the end of its life.
No lights indicate that the headset has been turned off or that the battery is not charged.
What is the time it takes for beats to charge?
Beats claims that its Fast Fuel technology allows each earphone to play for up to 1.5 hours after five minutes of charging or up to 4.5 hours after fifteen minutes of charging. Each earphone may be fully charged in around 90 minutes, and the charge case with earbuds inside should take approximately 2.5 hours to charge.
Is it possible to charge Beats with an iPhone charger?
Your BeatsX Headphones, like your iPhone, use a lightning cord and are compatible with its adapters and cables.