How To Charge Beats Flex Headphones? [Quick And Easy Fixes To Try]

How to charge Beats Flex Headphones? Here are quick and easy fixes you should try!

We still feel the same way about the Beats Flex nearly a year after it was released: they’re inexpensive, but nonetheless great, Beats earbuds.

They have conventional Beats sound, a traditional Beats design, and many of the same features as other Beats headphones or apple headphones, but for non-Beats pricing.

The Apple W1 Wireless Chip; a built-in sensor for auto-play/pause; a 12-hour battery life with Fast Fuel; and, our personal favorite, a laser-cut micro-venting chamber to alleviate in-ear pressure are among the features featured.

 

Key takeaway

To charge Beats Flex headphones, plug the included USB-C cable into the port on the right control module and connect it to a power source. Do not use a micro-USB cable as this will not work. If the headphones are not charging, try restarting them, checking the power source, or updating their firmware.

Quick Answer, How to Charge Beats Flex Headphones?

The power switch is located on the right control module. To turn your earbuds on or off, press and hold the button for 1 second. To charge, use the provided USB-C connector to connect your earbuds to a power source. On a full charge, your earbuds can play for up to 12 hours.

How to Charge Beats Flex Headphones?
How to Charge Beats Flex Headphones

Watch this: How to charge beats flex (rant)

How to Charge Beats Flex Headphones?

You can utilize the multi-feature button, but the Beats Flex also has a sensor that will automatically pause and resume music when you take them off and put them back on. Not only is that convenient, but it can also save you a lot of battery life.

In that regard, charging is accomplished via a USB-C connector on the left side of the earbuds, near the volume controls. According to Beats, the beats flex wireless earphones boast a 12-hour battery life and quick charging, with a 10-minute charge providing an hour and a half of listening.

The Beats Flex differs from more expensive Apple wireless earbuds such as the AirPods Pro in that the latter uses the newer H1 Wireless Chip, which enables hands-free Siri, and the former uses the older W1 Chip.

Aside from hands-free Siri, the more expensive H1 Chip supports Bluetooth 5 against the W1’s Bluetooth 4.2, which implies the H1 Chip has a slightly longer battery life.

To charge your beats flex Wireless Headphones, follow these steps:

  1. To charge, use the provided USB-C connector to connect your earbuds to a power source.
  2. From a full charge, your earbuds can play for up to 12 hours.
Recommended:  What Headphones Work With PS4? (Complete Answer Here)

You can use any USB-C power adapter, such as the Apple 20W USB-C Power Adapter. You can connect to older power adapters or gadgets via a USB-C to USB cord. You can also charge any android device/phone, USB-C/thunderbolt with your MacBook or iPad, however, keep in mind that the iPhone lightning cord cannot do so.

When your earbuds are turned on and configured, the LED indicator light on the power button indicates how much listening time is remaining:

  • White: there is still more than an hour to go.
  • Red indicates that there is less than one hour left.
  • Blinking red indicates that the battery needs to be charged.

How to Connect Beats Flex Earphones to iPhone, iPad Air, or iPod Touch?

  1. Check if Bluetooth is turned on on your iPhone, iPad, or iPod touch.
  2. Place your earbuds on top of your unlocked iOS device.
  3. Hold down the power button on your earbuds. Your earbuds are discoverable when the indicator light flashes.
  4. Follow the on-screen instructions on your iOS device.
  5. Learn what to do if you can’t connect to your device.
How to Connect Beats Flex Earphones to iPhone, iPad Air, or iPod Touch?
How to Connect Beats Flex Earphones to iPhone, iPad Air, or iPod Touch?

How to Connect Beats Flex Headphones to a Mac, Android device, or another device?

  1. Check that Bluetooth is turned on on your Mac, Android device, or another device.
  2. Place your earbuds on top of your unlocked device.
  3. Hold down the power button on your earbuds. Your earbuds are discoverable when the indicator light flashes.
  4. On your Mac, Android device, or another device, go to the Bluetooth menu. On a Mac, for example, go to the Apple () menu > System Preferences, then Bluetooth.
  5. Tap or click your earbuds in the list of discovered Bluetooth devices.

How to Use your Beats Flex Headphones?

Learn how to use the buttons on the left control module to play music, adjust the volume, and answer phone calls.

1. Play some songs

  1. Use the center button on the left control module to control audio playback:
  2. To play or pause audio playback, press once.
  3. To skip to the next track, press twice. To go backward, press three times.
  4. To advance through a track, push twice and hold on to the second press. To scan backward through a track, press three times and hold on to the third press.
  5. You can also pause and resume audio by clipping your earbuds together and unclipping them.
Recommended:  What Are The Best Songs To Test Headphones? (8 Songs You Should Try!)

2. Increase or decrease the volume

  1. Use the volume buttons on the left control module to adjust the volume of the playback. Use your phone’s volume controls to adjust call volume.
  2. Press and release the volume up button, or press and hold to continually increase the volume.
  3. Press and release the volume down button, or press and hold to continually lower the volume.

3. Return phone calls

  1. Use the center button on the left control module to control phone calls:
  2. To answer or end a call, press once.
  3. To answer a second incoming call and put the first on hold, press once. When there are two active calls, this switches between them.
  4. To reject an incoming call, press and hold for roughly a second.
  5. To cease listening through your earbuds and send the call to your phone, press twice.

4. Ask Siri

  1. Press and hold the center button on the left control module until you hear a chime to activate Siri. Then explain what you require. Find out what to do if Siri isn’t responding.
  2. Siri features may differ depending on the country or location.
  3. To enable voice help for other devices, press and hold the center button on the left control module.

Should you buy the Beats Flex Headphones?

1. You require a low-cost pair of wireless headphones for your new iPhone

With Apple removing the included earbuds from new iPhone boxes, the Beats Flex is an obvious option if you require a pair of wireless headphones.

2. You adore Beats and desire a second set of wireless earbuds

If you know you like Beats’ sound quality and already have a pair of the brand’s superior earbuds, the Flex is a decent backup option that you can pack in a bag and carry with you. At $50 (£50, approximately AU$70), you won’t feel awful if you lose them, and they have the majority of the same functions as other, more costly Beats buds.

3. You always forget to charge your earbuds

If you always forget to charge your headphones, the Beats Flex with Fast Fuel is a smart choice. Because they can deliver an hour and a half of battery life on a 10-minute charge, you can charge them while you’re in the shower and have them ready to go when you’re done.

Recommended:  How to Pair Jaybird Headphones (Easy Guide)

Alternative Video: How To Charge Beats Flex Headphones?

How To Charge Beats Flex Headphones?

Conclusion on How to Charge Beats Flex Wireless Headphones

The Beat Flex is an excellent earphone with excellent sound quality and battery life. The earphone has received very positive feedback from consumers, and many fresh purchases have been made.

However, many new Beats Flex owners are having trouble charging their devices and are unsure how to charge their Beats Flex.

The Beat flexbox comes with a cable, one end of which attaches to the Beats flex but the other end does not fit any charging device. Because many consumers are still unsure how to charge the new Beats flex, it is now dead after the battery has been depleted.

If you want to upgrade to more powerful headphones, consider the powerboats pro, beats x, apple AirPods, true wireless earbuds, beats solo pro, and beats flex earbuds. These are the beats headphones that you can use every day to listen to your Apple music and watch movies!

These headphones are wireless charging, have an apple w1 chip, and USB c cable, and have a long-lasting battery life! With the steps above, we hope that we are able to help you in charging your beat flex headphones!

Should you buy the Beats Flex Headphones?
Should you buy the Beats Flex Headphones?

FAQs About Charging Beats Flex Wireless Headphones

What kind of charger do the Beats flex use?

The Beats Flex earphones’ USB-C charging cable works with any USB-C connector, including recent MacBooks. A USB-C power adaptor is needed to wall-charge the Beats Flex.

What is the best way to charge my Beats wireless headphones?

Place your Beats Studio Buds in the charging case to charge them. Here’s what you should do if you need to charge both the earbuds and the charging case: Insert the earbuds into the charging case. Use the USB-C connector included with your Beats Studio Buds to connect the charging case to a power source.

How long does it take to charge a pair of Beats by Dre Flex headphones?

It takes approximately 90 minutes to charge a pair of Beats by Dre Flex headphones from dead to full battery status. A 10-minute Fast Fuel charge will provide 1.5 hours of listening time. The headphones must be connected to a USB-C port (also known as a Type-C cable) for charging.

Trina Oralde

I'm a tech writer and contributor who covers the latest in gadgets and technology. I keep my finger on the pulse of the tech world, so you don't have to. Stay up-to-date on the latest with me!

 

Recent Content