How To Reset Bluetooth Headphones? (2 Easy Methods To Help You)

How To Reset Bluetooth Headphones? Sometimes connecting wireless headphones to Bluetooth fails. Connectivity troubles when pairing headphones might occur for a variety of reasons.

When connecting your headphones or earphones to Bluetooth and they don’t pair properly, the simplest approach to fix this is to reset the Bluetooth connection for the headphones or earphones.

Here is a simple solution, Read the whole article for the full guide for your brand.

How To Reset Bluetooth Headphones?
How To Reset Bluetooth Headphones?

Key takeaway

To reset Bluetooth headphones, first turn them off and press and hold the power button for 7-15 seconds. This should cause a blue light to flash four times, indicating that the factory reset has been completed. Alternatively, unplug the headphones from all cords and connect the charger to an electrical socket. For Sony headphones specifically, turn them off and hold the power button for 10-15 seconds until a blue light flash.


Quick Answer, How to Reset Bluetooth Headphones?

1. Unplug your headphones from all of their cords.

2. Connect the charger to an electrical socket. Alternatively, you can attach one end of the USB cord to a powered-on computer.

3. Hold down the power button. Connect the other end of the USB cord to the USB-C connector on the right earcup at the same time.

4. Wait until the Bluetooth light turns blue.

5. Turn off the power supply.

Watch this: How To Reset Your Bluetooth Headset. | How To Reset Bluetooth Earphone | Reset Bluetooth Earphone

Resetting Bluetooth Headphones

Previously, all you had to do was plug your headphones’ jack into a gadget. However, you had no reset options and could only pray that the headphones would start working after plugging them in and out.

Bluetooth headphones, on the other hand, have made troubleshooting more dependable, although not always easy. Still, it appears that with each new model, you must relearn how to reset Bluetooth headphones.

Companies ideally want to make it easy for you to operate and repair your headphones. However, some firms aspire to be unique in their design, which complicates the customer experience.

Recommended:  How To Connect Jabra Headphones? (5 Easy Solutions You Can Try)


Here are the Easy Steps to Guide You on How to Reset Bluetooth Headphones

These steps are for general resetting of Bluetooth headphones:

  1. Before beginning the Bluetooth reset operation, turn off the Bluetooth headset.
  2. Locate the Bluetooth headset’s power button.
  3. Press the Bluetooth headset’s power button. (On some headsets, you must depress both the volume + and power buttons at the same time.)
  4. Press and hold the power (and volume +) buttons for 5 to 20 seconds.
  5. Depress the power (and volume +) buttons on the headset.
  6. On some headphones, the LED lights will blink or illuminate continuously to indicate that the pairing has been reset.
  7. Remove the Bluetooth headphones’ name from your phone’s or device’s Bluetooth linked list.
  8. Once your phone or device has been deleted, turn it off and restart it.
  9. Reconnect your Bluetooth headphones to your phone or device.
  10. If the reset process was successful, the Bluetooth headphones should pair with your phone or device.
  11. The Bluetooth headset should now be RESET and ready for normal use.

NOTE: If your Bluetooth headset contains a CALL and/or PLAY/PAUSE button, you may need to click these buttons in addition to the power button to reset your Bluetooth headphones.

Bluetooth Headphones
Bluetooth Headphones

Resetting Bluetooth Headphones according to Brands

Beats Headphones

Beats has a wide selection of Bluetooth headphones. Some models, however, are prone to connectivity and charging troubles, and you must reset them to try to resolve them.

Fortunately, Beats headphones are often simple to reset if you know what you’re doing or follow these procedures.

  1. Hold down the power button for approximately ten seconds before releasing it.
  2. Wait for the white and red LEDs to begin blinking.
  3. Wait for the lights to cease flashing to indicate that the reset has been completed.
  4. Connect the headphones to your device.

Bose Headphones

Bose headphones are quite popular, and the firm makes it very easy for users to change their settings. Furthermore, these headphones may be reset in four simple steps.

  1. Remove the headphones.
  2. Hold down the power button for at least ten seconds, or until you hear an indication that the Bluetooth device list is empty.
  3. Navigate to your device’s Bluetooth settings and remove the Bose headphones from the list.
  4. Pair the devices once more.
Recommended:  How to Connect a Gaming Headset to PC - Quick and easy guide!


JBL headphones are famous for their audio quality. However, the design and materials are of poor quality, necessitating frequent resets.

Nonetheless, the procedure is pretty straightforward and is very likely to assist you in permanently repairing your headphones.

  1. Remove your headphones.
  2. Keep the power button pressed for more than five seconds.
  3. Allow the light to blink to indicate that the device is being reset.
  4. Connect the headphones to your device.

Why Resetting Your Bluetooth Headphones Makes Sense?

If your Bluetooth headphones do not turn on, they are most likely not broken. All you have to do is reset it. In fact, a quick factory reset can solve many problems with a Bluetooth headset, such as:

  • If your Bluetooth headset is refusing to connect to your smartphone or laptop,
  • If your smartphone is unable to locate your Bluetooth headphones,
  • If your device detects the headphones but they do not pair successfully,
  • If your headphones keep disconnecting from your device despite being fully charged,
  • If you’re watching a video with delayed audio,
  • If the sound contains a lot of static,
  • If you can connect your Bluetooth headphones but no sound comes out, even if they are set as the Default Playback device.
Resetting Bluetooth Headphones
Resetting Bluetooth Headphones

Most of the time, the problem isn’t with the hardware. It’s simply a connectivity problem that can be resolved by resetting your headphones.

You might be dealing with a software problem at times. For example, if you installed updates for your smartphone or firmware changes for your headphones, you may need to reset the headset to make it work again.

Recommended:  Do Headphones Increase Ear Wax Production?

Conclusion On How to Reset Bluetooth Headphones

Many issues can be remedied by Factory Resetting your Bluetooth Headphones/Earbuds, including “stuttering sounds (also known as an unstable Bluetooth connection),” “one side sound (or one side no sound),” “unable to connect,” and occasionally “Bluetooth audio lag (audio-visual not synced).”

However, because True Wireless Earbuds often have 2-3 independent “pieces,” and because the True Wireless Bluetooth technology has a sophisticated connection mechanism, resetting True Wireless earbuds can be difficult.

Anyway, we’ve compiled a list of the most frequently encountered methods of factory resetting True Wireless Earbuds above. Please take a look and give them a shot; they might help.

Before you begin, keep in mind that the first step you should always take before performing a factory reset is to go into your phone/computer’s Bluetooth menu and “forget” the device you are trying to reset, as you won’t be able to rejoin them afterward.

Reset Bluetooth Headphones
Reset Bluetooth Headphones

FAQs On Resetting Bluetooth Headphones

What is the procedure for resetting wireless headphones?

Remove the earbuds from the case and press the buttons for a few seconds until they turn off. Beginning with the earbuds in the OFF position, hold down the buttons on both earbuds for approximately 10 seconds. The LEDs will flash three times in red and white. Your earbuds will be reset as a result of this.

How can I manually reset my Bluetooth headset?

Remove the headset from the list of associated devices on your phone.
After you’ve removed something, turn off your phone and then turn it back on. This clears the Bluetooth stack in the phone’s Bluetooth software.
Reconnect the headset to your phone.

Why aren’t my Bluetooth headphones working?

If your Bluetooth headphones aren’t producing any sound, make sure the Media Audio setting is enabled. Choose your Bluetooth headphones from the drop-down menu. In Android, go to Paired Devices. Make sure that Media Audio is turned ON on the next screen.

Trina Oralde

I'm a tech writer and contributor who covers the latest in gadgets and technology. I keep my finger on the pulse of the tech world, so you don't have to. Stay up-to-date on the latest with me!


Recent Content