How To Connect Bose Headphones To PC? (Easy Guide To Follow)

When you buy a set of headphones, you most likely expect to use them on numerous devices, such as your smartphone, computer, and gaming console. Especially if you've invested in some high-quality headphones from a well-known brand like Bose.

When your headphones are wired, the technique is really straightforward; it is just a plug-and-play operation.

However, if you have wireless headphones (most of which are Bluetooth-based), the process may be more difficult, especially on a Windows PC.

If you wonder how to connect Bose headphones to PC, you have come to the right place.


How to Connect Bose Headphones to PC
Connecting Bose Headphones to a PC


To connect Bose headphones to a PC, follow these general steps:

Turn on your Bose headphones and put them in pairing mode by pressing and holding the Bluetooth button until the LED light flashes.

On your PC, go to Settings > Devices > Bluetooth & other devices.

Click “Add Bluetooth or other device” and select “Bluetooth”.

Select your Bose headphones from the list of available devices.

Follow any additional prompts to complete the pairing process.

For more detailed instructions, you can refer to specific guides on websites such as Lifewire, Headphonesty, Roger Perkin, Windows Report, or Descriptive Audio.

Here is how to connect your Bose Headphones to your PC?

1. Open the Windows 10 Action Center and, if necessary, turn on Bluetooth.

2. Go to Settings > Add Bluetooth or another device> Bluetooth by right-clicking Bluetooth.

3. To make the Bose headphones discoverable, turn the power switch to the right. Select your headphones from the list on your PC.

This is a short answer. Read the article for full details and alternative methods.

If your Bose headphones aren't connecting with the Bose Connect Windows app, you've connected them hundreds of times with a Windows 10 PC/laptop, and you've followed Bose's advice like upgrading your firmware and installing Bluetooth drivers, the instructions below may help!

Best Way to Connect your Bose Headphones to PC

Here's the quickest and easiest way to wirelessly connect your Windows 10 PC to a pair of Bose headphones.

  1. To open the Windows 10 Action Center, click the square icon in the lower-right corner of your desktop.
  2. Check that Bluetooth is turned on. If it is, the Bluetooth icon should be highlighted.
  3. Go to Settings by right-clicking Bluetooth.
  4. Add a Bluetooth or other device by clicking the Add button.
  5. Bluetooth should be selected.
  6. To make your Bose headphones discoverable, turn them on and firmly move the power switch to the far-right position.
  7. Select your Bose headphones from the list of Bluetooth devices.
  8. The Windows 10 pairing procedure will begin immediately, and you should get a completion notice within a few seconds.
  9. Your Bose headphones will now connect to your Windows 10 PC whenever Bluetooth is enabled and the headphones are turned on.
Recommended:  TOP 5+ Best Headphones Under 150 To Buy (Comprehensive Review)

How to Connect Bose Headphones to a Computer? – For the First Time Pairing Your Headphones

  1. Make your headphones “ready to pair” by pressing and holding the power button next to the Bluetooth symbol until you hear the command “ready to pair.”
  2. Release the button and place your Bose headphones within 3-6 feet of your computer.
  3. Locate the Bluetooth icon on the taskbar's right side (if yours is located at the bottom of the screen). Click it, then select “Add a Bluetooth device.”
  4. A window will appear; select “Add Bluetooth or other devices,” followed by the first choice “Bluetooth.”
  5. Allow a few seconds for the device list to populate.
  6. Other PCs, smartphones, and even smart TVs are sure to come on the list. Because your Bose headphones are in “pairing” mode, you may see two different icons for them.
  7. If you choose the headphone icon (rather than the phone and screen symbol), the pairing will begin. Be patient until it's completed.
  8. When it is finished, look for the speaker icon on the right side of the taskbar. Click on it, then on the name that appears above the volume slider. A list of output devices will be displayed.
  9. Make sure your Bose headphones are selected as the output device. It's also a good opportunity to adjust the volume.
  10. Take advantage of your Bose headphones on your Windows PC!
How to Connect Bose Headphones to a PC?
How to Connect Bose Headphones to a PC?

How to Connect the Bose Quiet Comfort QC35 II Wireless Headphones to your laptop or PC?

  • Push the right earpiece button all the way to the Bluetooth sign on the QC35 and hold it there for at least 10 seconds. Put on the headset and listen for the commands “all paired devices cleared” and “ready to pair.” (These may not be the exact words you hear, but they are close.)
  • After the QC35 has finished speaking, remove your finger from the button, and the QC35 will return the button to the “on” position. Leave it alone and position the QC35 near your PC (3-6 feet).
  • Right-click the start button and select Control Panel.
  • Select “Device Manager.” Then, next to “Bluetooth,” click the > button. If “Bose QC35” appears in that list, right-click it and select “Delete.”
  • Close “Device Manager,” then select “Devices and Printers.” If you find any “Bose QC35” devices in the list, right-click and eliminate them.
  • Close Control Panel and look for the Bluetooth icon in the taskbar on the right side (if yours is located at the bottom of the screen). Click it, then select “Add a Bluetooth device.”
  • Because your QC35 is still in “Pairing” mode, you will see one or more buttons that indicate “Bose QC35 Ready to Pair” on that screen.
  • The pairing will begin when you click on the image of the QC35 with a headset icon (rather than a phone and screen symbol). Be patient as the program is reloaded into the Device Manager.
  • When that process is finished, return to “Control Panel” and select “Sound.” Make the “Headphones, Bose QC35 Stereo” the default. Exit the Control Panel.
  • Make sure the speaker icon on the taskbar is set to 100 percent.
  • Put your QC35 on your head and start listening to music on your computer. The sound should be audible through the QC35. If you don't, it's possible that the volume on the QC35 has been reduced to zero, therefore press the Volume (+) button on the QC35 repeatedly till you hear the song.
  • Have fun with your music!
Recommended:  How To Turn Off Headphone Mode In Android And iOS? [Easy Steps]

How to Remove Bose Headphones from the Pairing List?

In contrast to competing wireless headphones, restarting your Bose headphones will NOT delete any previously paired devices or software upgrades. If you're still having difficulties connecting your headphones after resetting them twice, try manually erasing the pairing list from your headphones.

Simply remove your headphones and slide the power button to the right for 10 seconds to accomplish this. From your headphones, you should hear “Bluetooth device list cleared.”

How to Troubleshoot Bose Headphones with Windows 10?

1. Remove your audio driver and replace it with the most recent version

  • Open Device Manager by going to Search and typing device manager.
  • Locate your audio device, right-click it, then select Uninstall device from the menu that appears.

Windows will prompt you to confirm that you want to remove the driver. Uninstall device should be selected. If you're using wired Bose headphones, you might want to consider uninstalling your audio driver to resolve any issues.

After removing the audio driver, go to the website of your motherboard or sound card manufacturer and download the most recent audio driver.

However, if you simply use automated driver update software, things could become much easier. That's a tool with a massive database of drivers, and it only takes one click to do the operation.

You'll get the most recent audio driver in no time. Aside from assisting you this time, keep in mind that new device drivers are added on a daily basis.

2. Uninstall the headphones from Device Manager

Select Device Manager from the list by pressing Windows Key + X.

Recommended:  How To Connect Bluetooth Headphones To Mac? (Easy Guide!)

Locate your headphones, then right-click on them and select Uninstall.

3. Use a Bluetooth adaptor and keep your Bluetooth drivers up to date.

Bluetooth drivers can cause issues with Bose headphones, so make sure they are up to date before connecting Bose Bluetooth headphones. If you have the most recent drivers and the problem remains, you may need to utilize a Bluetooth adaptor.

Users claimed that the problem was addressed after purchasing a Bluetooth adapter and installing the relevant drivers. When purchasing a Bluetooth adapter, make sure it comes with a driver CD to avoid any future Bluetooth troubles.

Alternative Video: How To Connect Bose Headphones To PC?

How To Connect Bose Headphones To PC?

Conclusion on How to Connect Bose Headphones to PC

Connecting your Bose headphones to a Windows PC can be difficult.

Because of the Bose Connect app, Bose wireless headphones are fantastic for usage on smartphones. It is simple to pair them with both Android and iOS devices. You also get useful features like adjustable noise cancellation and an automated off-timer.

Unfortunately, the same cannot be said for connecting your Bose headphones to your laptop or computer. This is especially true given the lack of a Bose Connect app for Windows devices.

It's even more aggravating when you have a meeting in a few minutes and your headphones refuse to link with your PC no matter what you try.

FAQs About Connecting Bose Headphones

Why am I unable to connect my Bose headphones to my PC?

If pairing your PC with Bose headphones doesn't work, you'll need to wipe the headphones' memory. Slide the Power button on your Bose headphones up to the Bluetooth sign and hold it there for 10 seconds.

Can the Bose Quietcomfort 35 be connected to a computer?

While the Bose QC35 II gaming headset supports Bluetooth, you will not be able to pair it to a device wirelessly while it is hooked into your PC. Other headsets, such as SteelSeries' Arctis 9, include this feature.

What is the procedure for pairing my Bose headphones?

Using the Android Menu's Settings
Find and tap the Apps Menu.
Navigate to and press the Settings icon.
Choose Bluetooth. You may need to first pick Connections.
Select the Bluetooth item you want to associate with from the list of Available Devices.

Trina Oralde

I'm a tech writer and contributor who covers the latest in gadgets and technology. I keep my finger on the pulse of the tech world, so you don't have to. Stay up-to-date on the latest with me!


Recent Content