How To Pair Skullcandy Wireless Headphones? Connecting your brand new Skullcandy wireless headphones to your Bluetooth device for the first time can be a little perplexing. This article will try to guide you through the pairing process.
Before we begin, we'd like to point out that the steps below will work with the majority of wireless Skullcandy headphones and speakers. Grab a pair of headphones and let's get started. This article will walk you through the steps necessary to connect Skullcandy devices to your Android or iOS smartphone as well as your Windows or Mac computer.
GUIDES FOR PAIRING SKULLCANDY HEADPHONES
First of all, you need to check before connecting Headphones:
1. Press the power button of your headphone for few seconds until it will on. Now headphone will in pair mode.
2. Both the devices should be charged sufficiently.
3. Both the devices should have Bluetooth feature.
4. Both the devices should be placed closed each other.
Now you are ready for pairing Skullcandy Bluetooth Headphones. Let’s see how we can pair.
FIRST: GET TO KNOW YOUR HEADPHONES
Connecting your SkullCandy headphones necessitates familiarizing yourself with the buttons on the sides. SkullCandy, like most Bluetooth headphones on the market, has a few buttons for easy navigation. The plus, minus, and power buttons each serve a specific purpose. The power button, in particular, requires the use of codes to gain access to specific modes, such as Bluetooth.
Other SkullCandy headphone models, on the other hand, have a separate Bluetooth button. In addition, the power button on some SkullCandy headphones allows users to switch between modes.
Fortunately, there are steps and codes in the owner's manual that will assist you with your specific model of headphones. To enable Bluetooth connectivity in SkullCandy headphones, press and hold the power button for about 5 seconds.
SECOND: MAKE SURE THEY ARE VISIBLE
After you've finished activating pairing mode on your SkullCandy headphones, you'll need to enable Bluetooth on your device. Turn on your phone or laptop and navigate to the Bluetooth program, making sure it is set to visible.
If your smartphone or other Bluetooth device is not visible to another Bluetooth device, your SkullCandy headphones will be unable to find it on its own Bluetooth system. If you have your headphones on, they should appear in the smartphone's list of items.
HOW TO PAIR SKULLCANDY WIRELESS HEADPHONES?
1. Activate Pairing Mode on Your Skullcandy Headphones
Skullcandy headphones, like most others on the market, have a few buttons on the side for easy navigation, one of which is the Power On/Off button. The Power button on the majority of Skullcandy headphones serves as the button that activates Bluetooth functionality.
There are some units that have a separate Bluetooth button. Simply press and hold the Power/Bluetooth button for 4 to 5 seconds to enable Bluetooth connectivity.
When pairing mode is activated, the LED light will begin to flash. It's very likely that the Power On/Off button on the side of your Skullcandy headphones is used to access other modes, so read the owner's manual to learn more.
RECOMMENDED POSTS:
- How To Fix My Headset Mic Not Working? (Easy Solutions)
- How To Fix Headphones Only Work In One Ear? (Answered!)
- How to Listen to Music in the Shower [Answered!]
2. Locate the Headphones on Your Bluetooth Device
In this step, you'll want to enable Bluetooth connectivity on your device, which could be a phone, a laptop, or any other Bluetooth-enabled device. You should also ensure that your device is visible.
Remember that if your Bluetooth-enabled device is not set to visible, the headphones will not be able to find it. The headphones should appear in your phone's or laptop's list of items.
Android
To pair your Skullcandy headphones with your Android device, go to settings, enable Bluetooth, select “Pair New Device,” select your Skullcandy device, and you're done! The pairing procedure has been completed.
iOS
Pairing your Skullcandy with an iOS device is the same as pairing it with an Android device. Go to settings, turn on Bluetooth, look for your Skullcandy in the “Other Devices” section, and select it.
Windows ten
To begin pairing your Skullcandy headphones, click the Bluetooth button in the toolbar, select “Show Bluetooth Devices,” select “Bluetooth & Other Devices,” and tap on the Skullcandy headphones.
If you can't find the Bluetooth button in your toolbar, go to the taskbar at the very bottom of the screen and look for it beneath the upward arrow. Follow the steps outlined above.
Another way you can look for the Bluetooth functionality on your laptop is to search for it on your Windows search box. Select “Bluetooth & Other Devices” and then select your headphones.
MacOS
To connect your headphones to your Mac, head to the Apple menu on your Mac, select System Preferences, choose Bluetooth, locate your Skullcandy headphones, and then click “Connect.”
3. Confirm the Success of the Pairing Process
When your Skullcandy headphones have been successfully paired, they will notify you in one of two ways. First, they'll emit a beep. Second, the LED light will cease to blink. When you connect your headphones to Bluetooth, the LED light will begin to flash.
When the pairing process is successful, the LED light will stop blinking. If you successfully completed the pairing steps but did not hear the beep sound or see the LED light stop blinking, you must try again. If that doesn't work, try resetting your headphones.
The process of resetting a pair of Skullcandy headphones varies depending on the model. We strongly advise you to consult your owner's manual for the proper procedure. The reset process for most Skullcandy headphones entails turning off the headphones, holding down the Plus and Minus buttons simultaneously, and waiting for the double beep sound.
HOW TO CONNECT DIFFERENT DEVICES TO YOUR HEADPHONES?
1. Windows Laptops
The Bluetooth icon should be in the taskbar of Windows 10 laptops. If not, you'll need to enable it in the Settings menu. To enable Bluetooth, move the slider icon to the “On” position. If you prefer to use the taskbar, navigate to the Bluetooth icon by clicking the up arrow on the taskbar.
Make sure the laptop is visible to your headphones by clicking on it. If the connection does not establish itself automatically, proceed to the next step. Another effective way to look for Bluetooth connectivity on your PC is to use the search box. Simply choose “Bluetooth and other devices” and then your headphones.
2. Android Phones
The steps will be simpler for Android phones. Simply select Settings from the drop-down menu and toggle Bluetooth on. Check that your Bluetooth program is set to “visible.” Tap “Search for devices” in the Bluetooth program, and your headphones should appear in the list. Tap on them in the list, and you're ready to go.
3. Apple/MacOS
To connect your headphones to an Apple device while using MacOS, go to the Apple menu, select “System Preferences,” and then click on Bluetooth. Your SkullCandy headphones should be visible on the list already. Click “Connect” and, if necessary, “Accept.”
4. iOS
Pairing your SkullCandy headphones on your iOS device is the same as pairing them with an Android. Simply go to the settings and activate Bluetooth. Then, check for your device in the “other devices” area and then select it.
CONFIRMING THE CONNECTION
SkullCandy headphones have a feature that confirms that they have been successfully paired with a Bluetooth device. They will emit a beep. You may have also noticed an LED blinking after you turned on the headphones.
This does not imply a problem. When the pairing is successful, the LED will stop blinking. If this is not the case, and your headphones have been through the steps, repeat the process. If it still doesn't work, you'll need to reset your headphones.
Most SkullCandy headphones can be reset by turning them off and simultaneously holding down the Plus and Minus buttons on your device until you hear a double beep sound. Because the resetting procedure varies from model to model, it's best to stick to the instructions in your owner's manual.
WHY IS MY SKULLCANDY AIR RAID PRODUCING DISTORTED SOUND?
Skullcandy earbuds are known to have issues such as crackling, popping, and no sound. Let's take a look at some of the possible explanations.
1. Multiple Connected Devices
When you enable multiple devices, the Bluetooth system recognizes and connects to the second paired device. On the contrary, the Bluetooth system continues to stream audio from currently connected devices.
This, in turn, has an impact on audio quality. In the best-case scenario, your device solves the problem automatically in less than 30 seconds. If the problem persists, try the following:
- Hold the volume and center button to reorganize the list of paired gadgets
- Separating the paired devices from Skullcandy and reconnecting them once more
2. Low Battery
When the battery charge on your Skullcandy earbuds is low, you are likely to experience distorted or low-volume audio. To avoid these problems, plug the earbuds on your power cradle using an adapter.
3. Damage Speakers
Although the above steps aren't applicable, you will have to check the condition of the speakers.
POSSIBLE REASONS BEHIND THE DISCONNECTION
1. Unpaired device
One of the most common causes is that you haven't paired the desired device. Check that your Skullcandy earbuds are powered on and that pairing access is enabled.
There will be blue and red LED flashes. The red LED blinks three times when the earbuds successfully pair with your device.
2. Devices are not within a certain range
Skullcandy earbuds connect to devices within 33 feet of their location. As a result, you must keep your Bluetooth device at a safe distance from your computer.
If the above solutions do not work for you, it could be due to faulty devices. As a result, you must replace your device's broken motherboard.
WHY ARE MY SKULLCANDY EARBUDS NOT CHARGING?
Another common issue with earbuds is incorrect charging. This can happen to either one or both buds. If you don't see a red indicator light on your charging case when you put an earbud inside, your earbuds aren't charging.
Similarly, your earbuds case may not be closing properly. This can occur as a result of debris obstructing your charging pins at the bottom of the case. In other cases, the earbuds may not be properly seated on the case.
HOW CAN I RESET SKULLCANDY HEADPHONES?
You must first turn off your earbuds. Then, for five seconds, hold down the Volume and Power buttons at the same time. This clears your paired list; after disconnecting the connected devices, turn on the earbuds.
Here are some steps to take if only one person is working on the side:
- Remove the earbuds from the list of Bluetooth devices.
- Insert the earbuds into the charging case.
- Bluetooth should be turned off.
- Take your left earbuds out of the case.
- Tap the center button until you see a red light on your earbuds.
- Replace the earbud in its case.
- Rep the previous steps with the other earbud. Take out both earbuds and insert them into your ear. The earbuds will beep to indicate that the pairing was successful. Reactivate Bluetooth on your phone, tablet, laptop, and smartwatch. Pair your device with the earbuds from your device's Bluetooth list.
HOW TO CONNECT SKULLCANDY HEADPHONES & SPEAKERS TO BLUETOOTH?
In this article, you will learn how to pair Skullcandy wireless earbuds; please see the details below.
Skullcandy performs admirably, with a plethora of options to choose from. However, in some cases, connecting or pairing the devices is difficult. So, in this guide, we'll go over how to connect Skullcandy Bluetooth headphones.
You can accomplish this by simply following the steps and standards outlined here, which will aid in Skullcandy Bluetooth headphones pairing.
Prominent Methods to Pair Skullcandy Wireless Headphones:
The procedures for performing the Skullcandy technique wireless pairing with any device are outlined below. Simply follow the instructions one by one. However, the guidelines outlined here will work with the majority of Skullcandy wireless headphones as well as speakers.
1. TURN ON PAIRING MODE OF THE SKULLCANDY HEADPHONES AND SPEAKERS
You should be aware that the majority of Skullcandy earbuds and earphones have the same button for powering on/off as well as pairing with Bluetooth. Although the Speakers may or may not have the same button for power and Bluetooth pairing. It is entirely dependent on the model you are using.
To turn on the device, simply press and hold the Power button. Once the device is turned on, press and hold the pairing button for 4-5 seconds, or until the LED light flashes. When the LED light on your Bluetooth device begins to flash, it is ready to pair.
2. FIND AND PAIR THE SKULLCANDY HEADPHONES WITH YOUR PHONE OR LAPTOP
Android
For Android users, you must first go to the phone's Settings and then turn on Bluetooth. When Bluetooth is turned on, click Pair New Device.
Then, your device will look for the nearby Bluetooth device that has been suggested. Click on the Skullcandy gadget when it appears. As a result, it will be linked to your Android device.
iPhone
Similarly, iPhone users should go to Settings and enable Bluetooth on the device. The phone will then search for nearby Bluetooth devices that are available. You can find the Skullcandy device by clicking on “Other Devices.” And then tap it to connect to your device.
MacOS
If you have a Mac, you must go to the Apple menu. Then, click on the System options. Then you must select Bluetooth. After that, you should be able to see the Skullcandy device, so tap on Connect to pair with the Skullcandy Bluetooth Device.
Windows ten
If you have a Windows 10 user account, go to Settings. From there, navigate to and select “Bluetooth & Other Devices.” Then, turn on the device's Bluetooth and select “Show Bluetooth Devices.” When the Skullcandy gadget appears in the list, click it and then tap Connect.
3. CONFIRM PAIRING
Once you have effectively connected to the Skullcandy Bluetooth gadget, the LED of the device will stop blinking. After that, you can hear a verification voice. This guarantees that you have actually successfully combined the Bluetooth gadget.
Fixing Steps for Bluetooth Connection:
However, if you were unable to connect to the device by following the above-mentioned steps, you will need to perform the repairing actions in order to develop the Bluetooth connection. The Bluetooth device's connection is determined by both the hardware and the software application of the device.
So, for headphones or earbuds, press and hold the Volume Up and Down keys for 4-5 seconds. After that, you'll hear a brief beep. This ensures that the headphones are reset and that you must pair the device again.
For Bluetooth speakers, press and hold the center pairing button, as well as the Volume Up button, until you hear two short beeps. When you hear the beeps, your Bluetooth speaker has been reset and is ready to connect again.
If none of this resolves your concern, you can check to see if the Skullcandy device's Bluetooth is compatible with the device. However, in many cases, Bluetooth compatibility is not a concern because most devices nowadays include the most recent Bluetooth version.
CONCLUSION
It may be necessary to reset the headphones and begin the process again. If you don't have your owner's manual, the process of resetting your headphones varies slightly from model to model. In general, turn off the headphones to reset.
Holding down the volume up and down buttons at the same time will result in a double beep. Your headphones have been reset after hearing these beeps.
FAQs About Pairing Skullcandy Headphones
Why are my Skullcandy headphones not pairing?
Skullcandy headphones can be reset by replacing any old Bluetooth connections and then restarting the pairing process. You should remove your headphones. To reset the paired list, press and hold the Volume + and center or power buttons for up to 5 seconds.
What's the deal with my Skullcandy headphones flashing red?
Skullcandy wireless headphones are powered by a pair of small batteries. While Skullcandy headphones will last for a long time without being charged, the battery will eventually drain.
How do I reset my Skullcandy wireless earbuds?
To turn off your Skullcandy earbuds, press the power button. Now, for 5 seconds, press and hold the ‘Volume +' and ‘Center/power' buttons. This will clear the Bluetooth pairing list and reset your earbuds.
Recent Content
Finding the perfect pair of earbuds can be a daunting task with so many options available. Whether you're seeking superior sound quality, noise cancellation, or comfort, this guide will help you...
In today's fast-paced world, quality audio doesn't have to break the bank. Whether you're a music enthusiast, podcast lover, or simply need a reliable pair of earbuds for your daily commute, there...