How To Pair Bluetooth Headphones To Computer? (5 Solutions!)

As enjoyable as it is to blast your favorite songs (or Netflix series) from your PC speakers, it is often frowned upon by those of us who share our homes. This is where a nice pair of Bluetooth headphones come in handy.

Connecting a pair of Bluetooth headphones to a Windows PC is, thankfully, extremely simple and has a few advantages.

For starters, you won't have to connect a connection from your head to your laptop or desktop tower, and you could even be able to get up and move to the next room without halting playing if necessary.

We prepared step-by-step guidelines for you on how to pair Bluetooth headphones to computer. Make sure to read it until the end!

When your Bluetooth device and PC are in range of each other and Bluetooth is turned on, the two devices will normally connect immediately.

how-to-pair-sony-headphones-3/

How to connect Bluetooth headphones to a laptop, Dell, Mac, or PC?

Before connecting your wireless headphones to your computer, complete the following checks:

• Check if the audio volume on your machine is acceptable. If the audio is too low or set to mute, you may not hear any sound through your headphones even after they have been safely connected.

• Make sure your smartphone and headphones are within three feet of each other. The closer they are, the stronger the Bluetooth connection and the easier it is to connect them.

• Make sure both devices are charged. It is not necessary for these devices to be completely charged; simply ensure that they have enough power remaining so that neither of them shuts down suddenly when collaborating.

Wireless Bluetooth Headphones Won't Connect to Your PC

Bluetooth technology may be the main wireless connection nowadays, but it still has problems when compared to other wireless connectivity choices such as RF and IF.

And, before delving deeper into the more intricate causes of Bluetooth failure, it's a good idea to figure out where the problem is first.

Simply connect your Bluetooth headphones to several devices to accomplish this (like your phones, tablets, etc). And then see if it works.

If it doesn't, it's safe to assume that the issue is with your Bluetooth headphones. If it does, though, you should investigate your PC.

In any case, we've put together some simple instructions on what to do if your Bluetooth headphones won't connect to your PC.

For Bluetooth Headset issues

There are two common causes of headphones-related connection failure. They are as follows:

• The battery is running out of power.
• The Bluetooth configuration must be reset.

If these aren't the issues, you'll need to contact the manufacturer for a warranty replacement or take your headphones to a specialist.

However, before proceeding with any additional repairs, it is critical to rule out these two possibilities.

You can also check to see if your Bluetooth headphones are still linked to another device.

While some headphones enable more than three multipoint connections, others, such as Sony's WF-1000XM3, can only connect to two devices at once.

Check the battery

For Bluetooth to function properly, your headphones' battery must be fully charged; otherwise, you will most likely encounter a problem when attempting to connect your device.

When the battery runs out, the processor in the headphones begins to malfunction and fails to function properly.

To avoid connectivity issues caused by a low battery level, make sure to fully charge your batteries before using them. Spend some time charging the batteries or replacing them if you have replacements. Then, try pairing the devices once more.

Reset the headphones

The ability of your headphones to connect to your device may be compromised if you make changes to your device, such as updating the firmware or installing updates.

Resetting your Bluetooth headphones may be all that is required to correct the issues and get them working properly again.

Different headphone manufacturers offer different instructions for correctly resetting your device.

The good news is that our complete tutorial on how to reset your Bluetooth headphones covers most of the resetting techniques for various manufacturers of headphones.

Feel free to take a look!

If you've gotten this far and the above-mentioned measures haven't remedied the problem, go ahead and check your PC settings.

For PC issues

It's not unusual for your PC to be the cause of your Bluetooth headphones failing to connect.

Because a PC is a sophisticated device that relies on a variety of software and hardware to function, expect the problem to manifest itself in various areas. Here's a fast approach to resolving Bluetooth connectivity troubles on your PC.

Method 1: Connect Bluetooth Earbuds to a Computer – Windows 7 and 10

1. To access the Windows Bluetooth menu, use the action center next to the date and time on the taskbar (right-click the Bluetooth toggle and select “Go to Settings”), or search for “Bluetooth” in the Start menu. If Bluetooth is turned off, make sure it is turned back on.
2. Ascertain that your headphones are in Bluetooth pairing mode. They might have a specific button for this, or it could be a more esoteric command. Consult the device's handbook if you don't know-how.
3. “Add Bluetooth or other devices” should be selected. Select “Bluetooth” on the next screen.
4. If everything went as planned, your headphones should be in Bluetooth pairing mode and appear on the list of Bluetooth devices that your PC identifies in the vicinity. Click the device name, followed by “Connect.”
5. The procedure is slightly different with Windows 8.1, but it is still very straightforward. To connect the headphones to the PC, put them in pairing mode, launch the Start menu, type “Bluetooth” into the search box, navigate to the Bluetooth settings menu, and choose the headphones.

Connecting Bluetooth Headphones to Computers such as Lenovo, Samsung, iPhone, and Mac

Aside from connecting your Bluetooth headphone to your Windows, we have another method for you on how to connect your Bluetooth headphones to your Mac. Don't miss half of the article and read it!

Method 2: How to Pair Bluetooth Headphone with a Mac Computer

1. Launch the Apple Menu. The Apple menu is represented by the Apple-shaped icon in the upper left corner of your screen. When you click it, a drop-down menu appears.
2. Then, select System Preferences.
3. Then, select Bluetooth.
4. Check that Bluetooth is enabled on your Mac. On the Bluetooth page, under the symbol on the left side of the screen, it should say “Bluetooth: On.” If it shows “Bluetooth: Off,” click the “Turn Bluetooth On” button below.
5. Hold down the power button on your headphones. To connect your Bluetooth headphones to your Mac, you must first enable pairing mode on your earbud. Depending on the headphones, this will turn them on and immediately activate the Bluetooth. You may also have headphones with a separate “paring” button. More information can be found in the instructions that came with your headphones.
6. Finally, click the Connect button next to the name of your headphones. Your headphones' model number, which could be a series of letters and numbers, may be listed. If you don't remember the model number, you may always look for the Bluetooth speaker symbol.

Method 3: How to pair your Bluetooth device to a laptop/desktop computer

Learn how to connect your Bluetooth device to a Windows 7 and Windows 10 or Mac computer by watching the video below from the Sony Bluetooth Series.

Follow the four steps in the article below for further information.

Step 1: Make sure your laptop / desktop computer has a Bluetooth module

The first and most critical step is to ensure that the laptop or desktop has a Bluetooth module. Some laptops and desktop computers may not include this hardware. Check the handbook of your laptop or desktop to see if the Bluetooth module is available.

If your laptop or desktop does not come with a Bluetooth module, you can purchase an external Bluetooth module adapter to enable Bluetooth functionality on your laptop or desktop.

Step 2: Put the device you want to connect to your computer into pairing mode

Entering pairing mode allows the device you want to connect to your laptop or desktop computer to be discovered.

The methods for entering pairing mode may differ based on the device to which you want to connect (headphones, speakers, smartphone, etc.).

• When the WH-1000XM4 wireless Bluetooth headset is used for the first time, it automatically enters pairing mode.
• The second time you link it, however, you must press and hold the pairing mode button for 7 seconds.

Step 3: Turn on your laptop/desktop computer's Bluetooth.

Step 4: Connect and configure your device

Method 4: how to connect Bluetooth headphones to pc windows 7 and 10

We'll start with Windows because that's most likely what you're using. If you're using a MacBook or another device that runs macOS, scroll down to access our Mac section.

• In the bottom right corner of Windows, you'll see a slew of small status bars and icons for accessing shortcuts to various apps and OS services.

• Right now, we're searching for a Bluetooth indicator, which might be right next to your WiFi connection and volume level.

• If you don't see it straight away, you may need to click or tap the upward-facing arrow to receive a list of everything that's currently operating on your computer. In any case, we're looking for the Bluetooth icon in the taskbar or in this group. Select “Add a Bluetooth device” from the context menu.

• This should bring up Windows' native Bluetooth panel, where you can see your Bluetooth settings as well as any keyboards or gaming controllers that you have previously paired to your computer. Here, we want to click “Add Bluetooth or another device.”

• Select Bluetooth as the type of device you want to add on the following screen that appears. Other possibilities include wireless displays, non-Bluetooth controllers, and other DLNA devices.

• You'll now see a list of all Bluetooth devices that are available. You'll need to switch on your headphones and put them in pairing mode before they appear in this list. Simply click on them here, and your headphones will be linked.

• Finally, we'll return to the beginning of this guide to ensure that everything is operating properly. Examine the bottom right corner of your taskbar, but instead, click the volume icon. This will open a menu where you can control your computer's volume and default playback device right now. Check that your headphones are the default device, and if they aren't, click that menu and select them so that audio now comes through your headphones rather than your computer speakers. Easy!

That is all there is to it. Return to the volume menu to toggle between computer speakers and headphones, but your Bluetooth headphones should now automatically reconnect to your PC when you turn them on. If you need to repair them, simply follow this guide again.

Method 5: Connect Bluetooth Headphones to MacOS

Do you own a MacBook or another Apple product? Don't worry, we've still got you covered. The stages are very similar to those used on Windows, with the exception of a slightly modified structure due to macOS.

1. macOS places the status bar at the top of the screen rather than the bottom. We're looking for the Bluetooth symbol in your desktop's top bar.
2. Select “Open Bluetooth Preferences” at the bottom of the list that displays after clicking that icon.
3. Put your headphones in pairing mode, and they'll appear in the next window that appears. This displays everything that has previously been associated with your Mac, but in our instance, we only want to find your headphones and click “Connect.”
4. That concludes the pairing procedure! You should now be able to utilize your headphones with your Mac wirelessly.
5. If you want to double-check that you're utilizing the headphones for audio output, click the volume symbol in the status bar near the Bluetooth icon, just like you would on Windows. This should display every output device connected to your computer, allowing you to confirm that your headphones are selected.

Conclusion On How to Connect Bluetooth Headphones to Computer

Bluetooth devices including keyboards, mice, phones, speakers, and many others can be paired with your PC. Your PC must be Bluetooth-enabled in order to perform this.

Bluetooth is incorporated into some PCs, such as laptops, iPhones, Android, and tablets. If your PC does not have it, you can get it by plugging a USB Bluetooth adapter into a USB port on your PC.

Your Bluetooth headphones should now be paired to your PC if nothing went wrong. It is simple to do if you read the whole article and make it here! Even better, you should only have to go through those procedures once; switch on the headphones in the area of that PC again, and they should reconnect automatically.

FAQs About Connecting Bluetooth Headphones To Computer