How To Pair Indy Headphones? (4 Easy Steps To Try!)

How To Pair Indy Headphones? The Skullcandy Indy and earbuds are one of several new “pipe-style” devices that look similar to Apple's AirPods.

They do, however, have some unique characteristics and a significantly lower price tag. As more smartphones remove the headphone jack connector, true wireless headphones are gradually becoming the preferred way to listen to music privately.

Indy earbuds include a noise-isolating construction with silicone tips to seal off the ear canals and reduce ambient noise. Removable “stability gels” aid in achieving a more comfortable and dependable fit. With an IP55 rating, Indy is water and dust-proof.

If you're having trouble pairing your new Skullcandy Indy Anc Earbuds, don't worry we have prepared steps on how to pair them! Make sure to read the whole article to find out!

How to Pair Indy Headphones?

1. To pair the earphones to any device for the first time, place them in the charging case without closing it.
2. Make sure the LED light in both earbuds turns red before removing them from the charging case: both earbuds will turn on and the LEDs will flash blue while they sync. Following that, you'll hear “Noise Cancelling ON,” signaling that the sync was successful, and only the left earbud will start to light red and blue.
3. Turn on the Bluetooth device and search for “Indy ANC” in the list of Bluetooth devices.
4. Click on it and follow any “Pair” or “OK” instructions that show on the screen. When the pairing is finished, a voice prompt will announce “Connected.”

For Android

1. To pair your earbuds with your Android device, click “+ Pair New Device” and select IndyTM ANC.
2. Accept the prompt to “Pair” or “OK” that displays on your screen.
3. When the pairing process is finished, a voice prompt will announce “linked.”

Single Bud Use

You sometimes want to be able to hear your music while also hearing what's going on around you. When you do this, you can only use one earbud. This is referred to as Mono Mode. IN MONO MODE, ONLY THE RIGHT INDY WIRELESS EARBUD CAN BE USED, BECAUSE THE RIGHT BUD IS THE PRIMARY BUD.

SOLUTION:

1. Remove IndyTM Wireless from the charging case and ensure that both Skullcandy wireless earbuds are connected to your device.
2. Simply replace the LEFT bud with the casing.
3. The RIGHT bud will stay paired and work for both phone calls and music.

You will retain all RIGHT IndyTM Wireless headphone capabilities, but keep in mind that when in Mono Mode, you will lose left earbud features such as volume reduction and tracking backward.

If you want to use both earphones again, place the right earbud back in the case, close the lid, and then remove both the left and right earbuds at the same time. When both true wireless earbuds are synced and connected to your phone, you'll hear a single Beep.

All media capabilities are now fully functional. To utilize Mono Mode again, just remove the right earbud from the case at any moment. If you have trouble pairing IndyTM Wireless, watch our video on how to reset IndyTM Wireless. All pairing issues will be resolved with a good reset.

READ ALSO: How To Comfortably Wear Headphones? (The Ultimate Guide)

Watch this: How to Enter Pairing Mode in Skullcandy Indy?

Buds not charging in Case/Case lid not correctly closing

• If you don't see the RED led signal on the bud after putting your Indy back in the case:
• Examine the wireless charging pins at the bottom of the case or on the bud for any debris.
• Check to see if the removable Stability Gel or ear gels have been twisted or come off, as this could be preventing the buds from settling properly in the case.
• A similar issue could be interfering with the closing of your case lid; if you're having difficulty shutting the lid correctly, this is an indication that the buds are not properly set or that the gels are interfering.

How to Fix Skullcandy Indy Evo Not Pairing Together?

Before attempting these fixes, disconnect your earbuds from your device. Remove your Skullcandy Indy Evo earbuds from the Bluetooth device list as well.

Skullcandy Indy Evo Earbuds Reset

If your Skullcandy Indy Evo earbuds aren't pairing, there could be a software issue. As a result, to remove any bugs or glitches, you must reset them. Here's a step-by-step guide to resetting your Skullcandy Indy Evo earbuds.

1. Take both buds out of the charging case.
2. For 10 seconds, press and hold the button in the center of both buds.
3. Your Skullcandy Indy Evo earbuds have been reset after 10 seconds.

After that, pair them with your device first, and then try to pair both buds together.

Restart Skullcandy Indy Evo Earbuds

If your Skullcandy Indy Evo earbuds are still not pairing after resetting them. You should then restart your earbuds. It also gets rid of software bugs and glitches. Here's how to reactivate your Skullcandy Indy Evo earbuds.

1. Remove both buds from the charging case first.
2. For 6 seconds, touch and hold both buds.
3. Your buds have been deactivated.
4. Place the buds in the case until both of them turn red, then remove them.
5. Both buds will now turn on automatically.

Put both buds in the charging case and connect them to any device. And then take them out of the case and let them pair automatically. Hopefully, they will pair up.

Troubleshooting Indy Headphones Pairing Issues

When consumers have issues with genuine wireless audio, it is mainly due to Bluetooth pairing issues. If you can't get IndyTM Wireless to pair with your phone or your earphones aren't connected, here's how to reset IndyTM Wireless to remedy pairing issues. SOLUTION:

1. In the charging case, place your IndyTM Wireless earphones.
2. Remove IndyTM Wireless from the list of associated devices on your device.
3. Turn off your device's Bluetooth mode (mobile or computer)
4. Remove your right IndyTM Wireless earbud from the case to turn it on. At this time, it will be in a disconnected state.
5. 4 times tap the earbud's center. This will automatically turn off and reset the earbud. When the light on the earbud goes red, you'll know it worked. If the light does not turn red, please repeat step 5 until it does. Replace the right earbud in its case.
6. Repeat the previous procedures, but this time only with the left earbud. (4th and 5th steps)
7. After that, remove both earbuds from the case to have the power on and start pairing with one another.
8. You'll hear one beep to indicate that the buds have linked together, followed by a voice prompt informing you that IndyTM true Wireless earphones are now “Pairing,” which means it's looking for your device.
9. Turn your device's Bluetooth mode back on and re-pair with IndyTM Wireless.

Final Thoughts on How to Pair Indy Headphones

The Skullcandy Indy Evo earphones provide reliable truly wireless performance. Most people find them very comfortable to wear, thanks to stabilizing gels that maintain a solid fit.

The sound quality of the Bluetooth headphones is generally superb, albeit the bass may be a little overpowering. You may also listen in stereo or mono, as well as make stereo phone calls.

The charging case can provide around 16 hours of use on a single charge. This is adequate but not extraordinary, and it does not last as long as some other brands.

Finally, with Skullcandy headphones' generous Fearless Use policy, Indy represents fantastic value for true wireless earbuds. They provide good quality and durability at a substantially lesser price than the majority of the competition.

FAQs About Pairing Indy Headphones