How To Connect Bluetooth Headphones To Mac? (Easy Solutions That Help)

How To Connect Bluetooth Headphones To Mac? And if you're wondering if you can use non-Apple headphones with your Mac?

The answer is yes!

Mac can connect with non-Apple Bluetooth headphones in the same way that AirPods compatibility isn't limited to Apple devices.

Most recent Mac computers are Bluetooth-enabled, allowing you to connect your Bluetooth headphones and listen to high-quality music when away from your seat.


Quick Answer, How to Connect Bluetooth Headphones to Mac?

1. Check that the device is turned on and discoverable (information can be found in the device's documentation).

2. On your Mac, go to the Apple menu > System Preferences, then Bluetooth.

3. Select the device from the list, then press the Connect button.

How To Connect Bluetooth Headphones To Mac?
How To Connect Bluetooth Headphones To Mac?


Furthermore, unlike Bluetooth headphones for TV, which require a separate audio transmitter, connecting Bluetooth headphones to a Mac computer is simple and quick.

Whether you're using truly wireless headphones or standard Bluetooth headphones, a few clicks and you're on your way to an outstanding acoustic experience.

This is easily comparable to the quality of Bose Headphones.

So, we prepared step-by-step instructions on how to connect your Bluetooth headphone to your Mac. Make sure to read the whole article to get a lot of information!

How to Connect Bluetooth Headphone such as Bose, Sony, Sennheiser, and Beats to Mac

Before you connect your Mac, make sure that your Bluetooth is on.

How to Enable Bluetooth on a Macbook Air

  1. Now that the Bluetooth on the headphones is in ‘pairing mode,' enable the Bluetooth function on your Mac.
  2. Navigate to the Apple menu.
  3. Choose System Preferences.
  4. To check the status of Bluetooth, click on it.
  5. Switch it on.

After turning your Bluetooth, start connecting your headphones to your Mac. Here is the step-by-step instruction:

  1. On your Bluetooth headset, press the Bluetooth pairing button. While some headphones/earbuds have dedicated buttons, others require you to leave the charging case open in order for any Bluetooth device to discover them.
  2. Then, on your Macbook, go to the Apple menu and pick System Preferences from the drop-down menu.
  3. To check the state of Bluetooth, click on the symbol and make sure it is switched on.
  4. If both devices' Bluetooth statuses (Macbook and headset or earbud) are turned on, you should see a list of accessible devices on your Mac.
  5. Tap the connect button to the right of the device you want to pair with.

Adjust Stereo Balance on Mac

To adjust the stereo balance on your Mac, follow the steps below:

  1. On your Mac, click the Apple logo on the top menu bar, then select System Preferences from the drop-down menu.
  2. Select the Output tab from the Sound screen.
  3. Next, you can modify the audio balance in your headphones by dragging the Balance slider to the left or right.

How to Fix Issues in Connecting Bluetooth Headphones to Mac?

How to Connect Bluetooth Headphones to Mac
How to Connect Bluetooth Headphones to Mac


Recommended:  The 8 Best JBL Loudest Bluetooth Speakers of 2022

Connecting Bluetooth headphones/ earphone to a Mac is convenient for listening to music while working, however, issues sometimes arise. Here's what to do if problems develop.

Setting up a wireless connection between similar goods that use the same connectivity standard can be difficult, but Apple has made it simple to connect Bluetooth headphones to a Mac.

It's realistic to suppose that those who use Bluetooth will have connection troubles at some point.

The good news is that Bluetooth has been around long enough to interact well with Mac software, which means that the software is an excellent starting point for troubleshooting issues with Bluetooth headphones or other Bluetooth-enabled hardware.

There are articles describing what to look for in Bluetooth headphones for individuals who are used to plugging in their audio devices, albeit it can be less clear how they actually operate and motivation to comb through manuals isn't at an all-time high.

Reading through the documentation, on the other hand, has its benefits because both product manufacturers and operating systems keep helpful material available, ranging from lengthy technical specifications to support sites that explain how to use the software.

Previously, switching Bluetooth off and then back on, as well as completely restarting PCs, handled problems with computer software, including Bluetooth and Wi-Fi issues.

As a result, if a customer is having trouble utilizing headphones on a Mac, it may be worth restarting the Bluetooth connection entirely, as this will frequently resolve any connectivity issues.

Bluetooth Headphones not connecting to Mac

If Wireless Devices or wireless earbuds fail to connect to your Mac, they are not configured to be discoverable, are out of range, are linked to other devices, have different Bluetooth versions, or are running low on power.

1. Devices are not configured to be discoverable

To connect your speaker to your Mac, make sure both devices are discoverable. Set your Mac to be discoverable by performing the following steps:

  1. Boot up your Mac.
  2. Select the Apple menu.
  3. Click on “System Preferences.”
  4. Select Bluetooth
  5. Select the device and press the “Connect” button.
  6. When prompted, click “Accept.”

When you connect your Mac to your wireless Bluetooth headphones, it will stay attached until you disconnect it.

Alternatively, you may pair your Bluetooth headphones with your Mac by clicking on the Bluetooth status indicator in the menu bar and selecting the device to be connected with.

To activate pairing mode on your Bluetooth speaker, follow these steps:

  1. Put your headphones on.
  2. Hold down the power button, which also serves as the Pairing button.
  3. When the light indicator blinks rapidly, release the button.
  4. This will allow your headphones to connect to your Mac.

2. Devices are not within range

Bluetooth headphones, while allowing you to be far away from your smartphone, have a set functioning range. If your headphones are outside of this range, they may be unable to connect to your Mac. As a general guideline, the devices you're attempting to connect should be within 20 feet of each other.

Recommended:  Burning In Your Headphones: Does It Work?

The operational range of headphones, on the other hand, varies from device to device. Some headphones have short operating ranges, but others have longer operating ranges. Bluetooth headphones with over 98 feet of the working range, such as the NuForce BE6i and BlueAnt, are available.

3. Other Devices Are Connected to Headphones

If you previously associated your headphones with your mobile phone, it may prevent you from connecting them to your Mac. In this scenario, you must first unpair your headphones before connecting them to your Mac.

To unpair your headphones, hold down the power button for several seconds, allowing the unpairing procedure to continue. To unpair your iPhone's headphones, follow these steps:

  1. Navigate to the Settings menu and select “Bluetooth.”
  2. Locate your headphones' name and press the I button.
  3. Click the “Forget This Device” button.
  4. Confirm that you want to unpair your iPhone's headphones.
  5. On Android, you may repair by:
  6. Enable Bluetooth.
  7. Hover over the name of your headphones.
  8. After selecting the device name, touch “Unpair” or “Forget.”

4. Bluetooth Versions vary

Bluetooth technology has been revised and updated numerous times over the years. As a result, if your headphones and Mac use different Bluetooth versions, you may have difficulty connecting them.

Bluetooth is, in essence, backward compatible. This means that newer versions can still pair with older ones. Check the Bluetooth version on your Mac and update it to improve its pairing capabilities. Furthermore, Bluetooth headphones with the most recent Bluetooth version perform better while pairing. As a result, select a headphone that has this feature.

5. Low-Battery Headphones

A low battery not only affects the sound quality of your headphones but also their ability to pair. If you're having problems connecting your headphones to your Mac, it's likely that your headphones' battery is low.

Before pairing your devices, make sure they are fully charged and plugged in. If you still have a charge in your headphones, make sure you charge them completely because the remaining power will drain faster than you expect.

6. Stuttering or Audio Distortion

After resolving all of the concerns listed above, your Bluetooth headphones may yield and enable pairing with the Mac. However, you may suffer poor sound quality from your headphones. The following are some of the causes of this distortion:

7. Inadequate Pairing

If your headphones and Mac have not been properly linked, you may notice stuttering in the sound output. Turning on and off is the best way to go. Unpair and turn off the headphones, then restart your Mac and pair them again. The sound quality is expected to improve following this troubleshooting.

Recommended:  How Did Headphones Change Over Time? (Find Out Its History!)

8. The Space Between Your Headphones and Your Mac

Headphones have an operating range where the Bluetooth connection is at its best. When the range is exceeded, the sound quality suffers. Remove any other objects that are in the way of your Headphones and Mac for a better sound. Disruption from other Bluetooth or WiFi-connected devices may also have an impact on sound quality.

9. Failure to correctly pair individual buds

You can listen to a single earbud at a time with wire-free and true wireless earphones. There is, however, a way to go about it. When you pair both earbuds and keep only one in your pocket, the sound output will stall. Read the manufacturer's handbook and understand the proper methods for single-bud listening before using an earbud.

Conclusion On How to Connect Bluetooth Headphones to Mac

Bluetooth headphones, keyboards, mouse, trackpads, and other devices can be connected to your Mac computer.

Bluetooth headphones allow you to sit further away from your screen while streaming video or moving around during a conference call.

Here are the procedures for connecting Bluetooth headphones to your Mac using System Preferences. Check out the following step-by-step instructions:

  1. Make your Bluetooth gadget discoverable by turning it on.
  2. Open your Mac and navigate to System Preferences, then Bluetooth.
  3. On the left side of the Bluetooth System Preferences, click the “Turn Bluetooth on” button.

Under Devices, all neighboring devices are displayed. If the item you want to add isn't showing up, make sure it's turned on and in pairing mode, and make sure the Bluetooth headphones are unplugged from any phones or other devices before connecting them to your Mac.

FAQs About Connecting Bluetooth Headphones To Mac

Why isn't my Macbook detecting Bluetooth devices?

Reestablish the connection: If your Bluetooth device is still not pairing, you can instruct your iPhone to “forget the device” in Settings, or you can remove the item from your Mac's System Preferences. Reset your gadgets as follows: Turning off and on all devices may assist to address the pairing problem.

What is the best way to connect my wireless headphones to my Macbook Pro?

1. Connect your Mac to a Bluetooth device.
2. Check that the device is turned on and discoverable (information can be found in the device's documentation).
3. Select Apple menu > System Preferences, then Bluetooth on your Mac. Open Bluetooth settings for me.
4. Select the device from the list, then press the Connect button.

What should I do to make my Bluetooth headphones discoverable?

Turn on the connected Bluetooth device and bring it within 3 feet (1 meter) of this unit. /POWER button (for the headphones) for more than 7 seconds while the Bluetooth headphones are turned off. Release the button when the indicator begins to blink rapidly. Pairing mode is activated on the Bluetooth headphones.

Barry Moroney

Hi, Barry here. I'm a tech writer and blogger. I write about the latest technology, gadgets, and software. I also provide the best how-to and guides on the latest sound systems. I'm always excited to share my knowledge with others!


Recent Content