How to Connect Bluetooth Headphones to Oculus Quest 2? [Quick and Easy Ways To Follow]

The latest VR-dedicated headset from Facebook has arrived on the market, and you’re probably curious about every tiny feature!

The Oculus Quest 2 is deserving of both praise and speculation. Sometimes the built-in unique audio features are insufficient.

In this article, I’ll tell you how to connect Bluetooth headphones to Oculus Quest 2, as well as other helpful information to help you get the most out of the audio.

The short answer is that Bluetooth headphones can be used with the Oculus Quest 2. When utilizing wireless headphones, you may have issues such as game stuttering and audio/video out of sync.

Quick Answer, How To Connect Headphones To Oculus Quest 2

1. From your Quest 2, open the Settings menu.

2. Select Experimental Features.

3. Turn on your headphones and make sure they are detectable, then press the Pair button next to Bluetooth Pairing.

4. Select your headphones from the list of available devices, and you should be good to go.

How to Connect Bluetooth Headphones to Oculus Quest 2
How to Connect Bluetooth Headphones to Oculus Quest 2

How to Connect Bluetooth Headphones to Oculus Quest 2?

When you enable Experimental Features on your Quest 2 headset, you will be able to pair it over Bluetooth. Take the following steps:

  1. Open the Settings menu from your Quest 2.
  2. Choose Experiment Features
  3. Turn on your headphones and check that they are detectable before pressing the Pair button next to Bluetooth Pairing.
  4. Choose your headphones from the listed devices and you should be good to go.

How To Connect Your Apple Airpods To Oculus Quest 2?

Connect your AirPods to Oculus Quest 2 Video

It is quite simple to connect Airpods to Oculus Quest Two. AirPods connect wirelessly to your device, so there are no connections or wires on the floor as they sync up wirelessly and smoothly.

To begin, make sure your Airpods are fully charged before using them with Oculus Quest Two.

To connect your AirPods to the Oculus Quest 2, follow these steps:

  1. Navigate to the Oculus settings menu, which can be found on the home screen of your Oculus Quest
  2. Navigate to the Experimental Features tab – This can be tricky to locate, but once you notice the experimental features, you’ll know you’re on the right route.
  3. Select Bluetooth pairing from the drop-down menu – After clicking this button, you may have to wait 30 seconds to a minute before seeing the option “ready to pair.”
  4. Read through the device list — A list of devices that you can associate with your Oculus Quest 2 will appear. Check that your AirPods are in pairing mode if you don’t see them. Shut down and restart your Oculus Quest 2 if they are in pairing mode and you have waited a full minute. Return to the beginning of these instructions.
  5. Choose your device – Connect your AirPods and you’re good to go!
Recommended:  Why Do Autistic People Wear Headphones? [Everything You Should Know]

The AirPods are now linked to your Oculus Quest Two and can be used wirelessly.

When using your Oculus Quest Two, you may need to pair your AirPods. If your AirPods are not paired, they will not connect automatically, which is why pairing AirPods is critical before you begin gaming.

READ ALSO: How Loud Is Too Loud For Headphones? (Quick Answer!)

Wireless Headphones Cause Performance Issues in Oculus Quest 2

Because the wireless connection technique is a workaround, it has a few drawbacks that may detract from your VR experience. The most common problem seen by customers is a significant loss in frame rates or latency when playing games.

This is especially true for fast-paced games or those that need you to glance around more, such as Robo Recall and Beat Saber’s 360° stages. In certain circumstances, the audio was also noted to be out of sync. The games’ stuttering difficulties can be severe enough to make the experience unplayable.

When operating media applications like Netflix and Amazon Prime, there were noticeably fewer, if not none at all. So, if that’s your goal with your wireless headphones, you’ve got a lot less to worry about than most!

The latency issues are caused by compatibility concerns between your wireless headphones and the Oculus Quest 2, which is also wireless. The audio and video signals received and processed by your devices are out of sync. As a result, your devices’ processing performance is drastically lowered.

Wireless Headphones Cause Performance Issues in Oculus Quest 2
Wireless Headphones Cause Performance Issues in Oculus Quest 2

Oculus Quest 2 Not Pairing

If you’re experiencing problems connecting or pairing your Oculus Touch controllers with your headset, it implies there’s an issue with the Oculus Quest 2 pairing code, and you can attempt any of the following solutions:

  • While using Oculus Quest 2 or Quest, press any button to wake the controller.
  • Press and hold the Oculus button while wearing your headset.
  • Remove the batteries and reinstall them in your Oculus Touch controllers.
  • Unpair and re-pair your controllers as follows:
  1. Open the Oculus software on your phone to unpair your controller.
  2. Select the universal menu option.
  3. Tap the Oculus Quest 2 or Quest headset with which you are currently linked.
  4. Tap Controllers, then select the controller to be unpaired.
  5. Unpair Controller > Unpair is the next option.
  • Open the Oculus software on your phone to repair your controller.
  1. In the top-left corner of your Oculus app, tap Oculus Quest 2 or Oculus Quest.
  2. In the bottom-right corner of your app, tap Settings.
  3. Under your name and email address, tap Oculus Quest 2 or Oculus Quest.
  4. Then, tap Controllers, followed by + Pair New Controller.
  5. To select which controller to pair, tap Pair Oculus Quest Left Controller or Pair Oculus Quest Right Controller.
  6. To complete the pairing, press and hold the buttons on your right controller or the buttons on your left controller until the controller LED blinks and then lights up.
Recommended:  How To Clean Headphones? (2 Easy Methods To Use Now!)

Is There Anything Else You Can Do?

Consider purchasing a Bluetooth transmitter and connecting it to the 3.5mm audio socket on your Quest 2 headset. This device, commonly referred to as an AV receiver, enhances the processing of wireless audio and video input. As a result, the overall experience with your VR headset is vastly improved.

This method has an average latency of 40 milliseconds, which you will not notice while immersed in your virtual reality experience! Keep in mind that the latency of various headsets may differ.

Nonetheless, connecting Bluetooth audio to the Oculus is becoming more popular! To complete this task, all you’ll need is a compatible transmitter and a suitable headset.

Headphones With Oculus Quest 2
Headphones With Oculus Quest 2

CONCLUSION on How to Connect Bluetooth Headphones to Oculus Quest 2

It’s important to note that this isn’t something that the Quest 2 officially supports right now. As a result, there may be lag and audio that is out of rhythm with what is happening on-screen. This appears to be more of a problem with games than with programs like Netflix.

But having the supported Bluetooth headphones, you can also hear a good sound quality with your airpods pro or other Bluetooth connection in your Oculus Quest 2.

If utilizing Bluetooth headphones is something you’ve always wanted to try, there’s no reason not to. It will not void your warranty or cause your Quest 2 to malfunction. Just don’t be too disappointed if the experience falls short of your expectations. It remains to be seen whether this is a feature that Oculus hopes to deploy in the future.

Recommended:  How To Charge Beats Flex Headphones? [Quick And Easy Fixes To Try]

In a nutshell, this virtual reality or VR device is like wearing glasses while enjoying the visuals in your smart tv and allows you to experience spatial audio, and original quest in all games that can give you a mixed reality while using your wired headphone, wired headset or apple airpods pro!

FAQs On Connecting Bluetooth Headphones to Oculus Quest 2

Does Oculus Quest 2 work with Bluetooth headphones?

Both 3.5mm and USB-C headphones are supported by Quest 2. So, while they acknowledge wired headphone support, they make no mention of Bluetooth compatibility. In fact, Oculus did not officially make USB-C headphones compatible with the Quest 2 until July 20th, 2021.

How do you connect wired headphones to Oculus 2?

On the Oculus Quest, wired headphones are the way to go. They are literally plug-and-play. The headset has an audio jack on both sides. You can connect a pair of headphones to either side or a single headphone to each side.

How do I connect Oculus 2 Bluetooth to my phone?

Enable Bluetooth on your phone, then connect your headset. After that, your phone will recognize your headset automatically. Then, to pair the headset with the phone, follow the instructions that appear on your smartphone’s screen.

Can you connect headphones to Oculus?

To summarize, any standard pair of headphones with a 3.5mm audio jack will work with the Oculus Quest. The Quest headset has two audio ports, one on each side. Both will work with any headphones, allowing you to use either side depending on how your headphone cable is configured.

How does sound work on Oculus Quest 2?

The Oculus Quest 2 has speakers built into a dedicated strip on the side of the headset, allowing you to play games without having to plug in a pair of headphones. These speakers are intended to be placed closer to the player’s ears and to produce much higher-quality sound than the original Oculus Quest speakers.

Trina Oralde

I'm a tech writer and contributor who covers the latest in gadgets and technology. I keep my finger on the pulse of the tech world, so you don't have to. Stay up-to-date on the latest with me!

Recent Content