Where to Plug in Headphones on PC? [5 Methods]

A headset or headphone is one of the coolest devices because it gives you freedom from external noise, and delivers an immersive audio experience. While connecting a headset to a Windows computer is not a big deal, it’s mostly plug and play, but if you want to go through some of the basics, here is the post. We will share how you can correctly set up a headset on Windows 11/10 PC.

Quick Answer, Where to Plug in Headphones on PC

Connect the headset’s headphone connector to the green-colored jack on the back of the desktop PC or the headphone jack on the right or left side of the laptop or netbook.

Where to Plug in Headphones on PC
Where to Plug in Headphones on PC

Where to Plug in Headphones on PC

This vital instruction is for people who are having trouble connecting the headset to their Windows 11/10 PC or who wish to understand the fundamentals.

 

  • Plug in a headset (Wired and Bluetooth)
  • Choosing the Best Output Device
  • Using the headset to record audio
  • Setup Headphones as the default output and an app input device
  • Troubleshooting

1] Plug in a headset

You should see two ends if you have a wired earpiece. The audio one is often green, whereas the microphone is pink. They also have symbols to distinguish them. Connect the wires to the appropriate ports on your desktop or laptop.

 

  1. To put your headset in pairing mode, long press the Bluetooth button or the power button.
  2. Go to sound Settings on your Windows 11 device and select Bluetooth & devices from the side panel on the left.
  3. Next to the Devices heading, click the Add device button.
  4. Allow your device to look for the headset, which is already paired. Click to couple when you see it in the list.
  5. It should connect immediately.
Recommended:  What Causes Hissing Sound from Speakers?

Windows 10

If it’s a Bluetooth device, you’ll need to pair Windows with it. The general steps are as follows:

  1. To put your headset in pairing mode, long press the Bluetooth button or the power button.
  2. Make sure Bluetooth is turned on. Turn on any physical switches that exist.
  3. Go to Devices > Bluetooth and other devices in Windows 10, then click the Add Bluetooth and another device button.
  4. Select Bluetooth.
  5. It will then look for the headset, which is already paired. Click to couple when you see it in the list.
  6. It should then connect immediately.
  7. You should be able to hear the music streaming if you play some music.

Easiest Ways to Plug in Headphones on PC

Where to Plug in Headphones on PC
Where to Plug in Headphones on PC
  1. Connect the headset’s headphone connector to the green-colored jack on the back of the desktop PC or the headphone jack on the right or left side of the laptop or netbook.
  2. Plug the microphone into the pink jack on the back of the desktop computer or the mic jack on the right or left side of the laptop or netbook.
  3. “Start | Control Panel | Hardware and Sound | Sound” will appear. To utilize the headset instead of the computer speakers, choose it on the Playback tab and then click “Set Default.” “OK” will be displayed.

Connect your headset to the USB 3.0 connection on your computer

Locate the USB 3.0 port on your computer and connect the USB cord. USB 3.0 ports contain the letters SS (Super Speed) next to them. They are frequently blue, but not always.

Recommended:  How To Troubleshoot Bluetooth Headphones Connected But No Sound? (Try These Easy Fixes!)

If your computer does not have enough available USB ports, you can utilize an AC-powered external USB 3.0 hub.

Connect your headset to the HDMI out connection on your PC

Locate the HDMI out port on your computer and connect the HDMI cable from the headset. Check that you are not plugged into the HDMI in port!

Connect your headset to your headphones

You’ll need bluetooth headphones with a 3.5-mm audio jack unless you bought a device with inbuilt AKG headphones and a dual-array microphone, such as a Samsung HMD Odyssey gaming headset, HP Reverb, or HP Reverb G2.

Final Thoughts on How to Plug in Headphones on PC

Previously, business professionals would use telephones to conference with clients or employees, but software such as Skype have made it easier for all users to voice and video chat with one another long-distance. A good audio output arrangement is essential for workers who frequently need to communicate with clients or other business experts.

Headsets allow users to listen to and chat to people hands-free, but the mouthpieces that come with them aren’t always of the highest quality. You can connect the wired headphones speakers to the computer, but you must also attach a separate microphone to the PC to use instead of the headset’s mouthpiece.

Frequently Asked Questions (FAQS)

Should I connect my headset to the front or rear of my computer?

Yes, the back ports usually provide superior sound quality. The driver will handle the front ports individually and will frequently not apply such features to the front ports.

How can I utilize my headset microphone on a PC?

Navigate to your computer’s Control Panel and select “Sound.” You should notice a green check mark next to “Microphone Realtek High Definition Audio” under the recording tab. At the bottom right-hand corner of the screen, click on the microphone and then select “Properties.” Select the “Levels” tab from the Properties menu.

Recent Content

error: Alert: Content is protected !!