How To Pair Bose Headphones? (3 Easy Steps You Can Try!)

We have written a comprehensive guide on resolving some of the most common Bose Bluetooth headset pairing issues so you don’t have to go through them again!

Bluetooth headset pairing issues can occur at any moment and with any device. Even high-end commercial headphone companies like Bose are not immune to these problems.

Bose Corporation, a maker of consumer electronics, supplies a variety of high-quality wireless Bluetooth headphones, wired headphones, canceling headphones earbuds, home audio sound systems, and portable speakers. The Bluetooth capability and audio sound quality are one of the best features of a Bose Headset, bose QC, bose sound sport, bose QuietComfort ii.

These headphones are expensive, so you’d anticipate a high-quality listening experience. You can’t even listen to anything since you can’t make a connection. This can be especially aggravating if you just want to unwind with some music after a long day at work.


How To Pair Bose Headphones?
How To Pair Bose Headphones?

Quick Answer, How to Pair Bose Headphones?

1. Invert the headset so that you are staring at the bottom.

2. To turn on the headset, flip the power switch to the On position.

3. Bring the headset as close as possible to the Bluetooth-enabled device with which you wish to link it. Additionally, the second device must be powered on.

4. To place your headset into discoverable mode, press and hold the call button (or another buttons specified in the instructions for your specific device) for approximately five seconds. A slow-blinking indicator light will appear.

5. Select the choice for the name of the Bose device you are pairing from the second device’s Bluetooth device list. If the device name does not appear, return to the Bose device and repeat the instructions.

Following the device selection, you may be requested to enter a password or confirm the connection. If prompted for a password, Bose recommends typing 0000 and then pressing OK.


What are Bose Headphones?

Bose Corporation, a maker of consumer electronics, supplies a variety of high-quality wireless headphones, wired headphones, canceling headphones, home audio sound systems, and portable speakers. The Bluetooth capability and audio sound quality are one of the best features of a Bose Headset.

Bose manufactures a variety of various styles of headphones, including over-the-ear, in-ear, and earbuds. Additionally, they manufacture noise-canceling headphones.

Noise-canceling headphones are popular because they can filter out any background noise, allowing you to listen to your music uninterrupted.

Bose also manufactures a variety of different types of speakers. They manufacture speakers for bookshelves, computers, laptops, and home theater systems.

Additionally, Bose manufactures outdoor speakers that may be used to listen to music while grilling or performing yard work.

Bluetooth allows you to connect a gadget wirelessly to a source; there is no need for a cord. Pairing establishes a connection between your Bose headset and other Bluetooth devices list, but first, you must enable pairing mode.

What are Bose Headphones?
What are Bose Headphones?

How to connect your Bose headphones to a Mac through Bluetooth?

  1. Switch on your Mac and Bose headphones products.
  2. Ensure that your Mac’s Bluetooth is turned on.
  3. Select “Add Device” from the Bluetooth setting on your Mac.
  4. Click “Continue” after selecting “Bose” from the list of devices that appear.
  5. In the box that displays on your Mac, enter the passcode that appears on your Bose headphones products and click “Continue.”
  6. Your Bluetooth-enabled Bose headphones should now be connected to your Mac or laptops. You may now listen to music through your Bose headphones directly from your Mac!
Recommended:  How To Connect Bluetooth Headphones To PS4? [A Comprehensive Guide]

How to Connect a Pair of Bose Headphones to a Computer?

This is the simplest and quickest technique for wirelessly connecting your Windows 10 PC to a pair of Bose headphones.

  1. To open the Windows 10 Action Center, click the square icon in the lower-right corner of your desktop.
  2. Ascertain that Bluetooth is enabled. If it is, the Bluetooth icon should be highlighted.
  3. Select Go to Settings from the context menu of Bluetooth.
  4. To add a Bluetooth or other device, click Add.
  5. Bluetooth should be selected.
  6. To make your Bose headphones discoverable, turn them on and firmly move the power switch to the far-right position.
  7. Select your Bose headphones from the list of Bluetooth devices that appears.
  8. The Windows 10 pairing procedure will begin immediately, and you should get a completion notice within a few seconds.
  9. Your Bose headphones will now connect automatically to your Windows 10 computer whenever it is equipped with Bluetooth and the headphones are turned on.

How to Connect Bose Headphones and Bose Sport Earbuds to an Apple Watch?

Put your device into pairing mode by removing the earphones from the case; a white light should illuminate, indicating that the earbuds are prepared to pair.

Go to Settings –> Bluetooth on your Apple watch device –> a list of devices should show –> select your device.

How to Connect a Pair of Bose Headphones via NFC?

  1. To turn on the headphones, turn the lid to the right.
  2. Unlock your device and enable Bluetooth and NFC functionality.
  3. Connect your device’s NFC touchpoint to the NFC touchpoint on your headphones. You may be prompted by your device to accept pairing.
  4. Once associated, you will hear the message “Connected to devise name>” and the Bluetooth light will illuminate solid white.
How to Connect a Pair of Bose Headphones via NFC?
How to Connect a Pair of Bose Headphones via NFC?

Bluetooth Not Discoverable/Not Detected/Not Visible on Bose

Devices and Bluetooth Configuration

Ascertain that both devices have Bluetooth enabled. It may appear easy, yet sometimes the simplest things are the most overlooked. Additionally, you should ensure that your Bose speaker is discoverable.

When the Bluetooth emblem is in ‘discoverable mode, it should flicker a blue hue.

This feature can be activated by pressing the Bluetooth button once. If the Bluetooth icon is white, push the button again, as the first press may have just woken up the speaker or entered Bluetooth mode.

Alternatively, you can hold the Bluetooth button for three seconds and then release it. Simply be careful not to hold it down for an extended period of time.

After ten seconds of holding the button down, the speaker will clear the Bluetooth pairing list.

The Speaker’s Proximity

Additionally, you should verify that your gadget is placed close enough to the speaker. Begin at a distance of five feet from the speaker and gradually increase the distance once both devices are paired.

Other Bluetooth Devices Must Be Disabled

Only six devices can be linked simultaneously with the majority of Bose equipment. This means that other devices may be vying for access to your speaker. Often, a Bose speaker will automatically attempt to pair with the previous device to which it was connected.

Disable Bluetooth on any other device products in the vicinity. If this does not work, you can clear the pairing list on your speaker and set your Bluetooth device to forget the speaker.

Simply press and hold the Bluetooth button for ten seconds until you hear a tone or the message ‘Bluetooth device list cleared’. Delete the speaker from your Bluetooth device’s Bluetooth list. You can now enable discoverability for your speaker and attempt to re-pair the two devices.

Recommended:  What Are Ohms In Headphones? (Everything You Should Know)

In the event that this does not work, you may need to restart your devices.

Your Devices Should Be Restarted or Reset

Switching off and on the speaker does a soft reset. Before attempting to repair the two devices, you should do the same thing with your Bluetooth device.

In the event that this does not work, you can reset the speaker. By pushing and holding the ‘Mute’ button for ten seconds, this is accomplished. You should observe that all of the speaker’s lights come on and then switch off. After this occurs, you can restart the speaker and attempt to repair your device products.

Issues of Compatibility

If your Bluetooth device is outdated, it may not be compatible with the Bluetooth on your speaker. Bluetooth is a backward-compatible technology. Thus, an iPhone with Bluetooth 5.2 can connect to a Bluetooth 3.0 speaker, while an iPhone 4 with Bluetooth 2.1 will be unable to connect to a Bluetooth 5.2 speaker.

How to Connect Bose Headphones if the having Troubleshooting?

If the Bose Connect app on your iOS or Android device does not detect or display your Bose Bluetooth® product, try the following:

How to Connect Bose Headphones if the having Troubleshooting?
How to Connect Bose Headphones if the having Troubleshooting?
  • Connect your product to your computer once without using the Bose Connect app.

If you’re having difficulty connecting a Bluetooth® device to your product using the Bose Connect app, try connecting directly from the device’s Bluetooth® menu.

Once connected, relaunch the app. More information is available at Connecting a Bluetooth® device. If a connection is still not possible, see Cannot connect Bluetooth® device for additional assistance.

  • Bluetooth Permissions Enabled for iOS13 and Up

When you install the Bose Connect App for the first time on your device running iOS 13 or later, Apple will request you to activate Bluetooth permissions. If you select “Do Not Allow,” the setup will fail. To complete setup, please activate Bluetooth permissions:

  1. On an iOS device, there are two ways to resolve this:
  2. Scroll down to the list of apps in your device’s settings.
  3. Choose Bose Connect
  4. Enable “Bluetooth” under “ALLOW BOSE MUSIC TO ACCESS.”
  5. Restart the Bose app by closing and reopening it.

Closing an app is device and operating system dependent. The following are common ways for mobile devices:

On iOS-powered devices:

To access active apps on an iOS device, either double-tap the Home buttons or slide up from the bottom center of the screen.

  1. Swipe left or right to locate the application you’d like to close.
  2. Swipe up to close the app.
  3. On Android-based smartphones:
  4. Press and hold the app icon on the home screen.
  5. From the pop-up window that displays, select App information.
  6. Tap Force Stop on the App Info screen.
  7. Ascertain that the Bose app is up to current.

If you do not have the most recent version of the Bose app, it may be missing features or upgrades. On your device, navigate to the app store, search for and choose the app. Install any available updates.

  • Conduct a search for and install any necessary product updates.

On a computer or laptops, navigate to and follow the on-screen instructions to guarantee your product is equipped with the most recent features and advancements. See Updating your product’s software or firmware

  • Ascertain that the app‘s location rights are not disabled in your mobile device‘s settings.
Recommended:  How To Make iPhone Headphones Louder? [5 Easy Methods For You!]

Ascertain that necessary permissions for the Bose app are not deactivated in your device’s app settings. These permissions are required in order for your Bose product to be detected and controlled:

For iOS devices, navigate to Settings > Privacy > Location Services and verify that the Bose app is not disabled.

To use the Bose app on an Android device, navigate to Settings > Applications and pick the Bose app. Check that Location is not disabled under Permissions. (Please note that the position of these settings varies by device.)

Multiple Connection Management

• The headphones pair with two Bluetooth devices and include a pairing list of eight devices products.

• Slide to and release with the headphones on your head to hear which device(s) are connected; repeat to connect to the next device.

Conclusions On How to Pair Bose Headphones

When you purchase a pair of headphones, you probably want to use them on a variety of device products, including your smartphone, computer, laptops, and gaming console. Particularly if you wore some decent headphones from a reputable brand like Bose.

When you wire your headphones, the method is fairly simple; it’s essentially a plug-and-play operation. However, if you have wireless headphones, bose wireless headphones or bose soundlink (which are almost always Bluetooth-based), the process may be more difficult, especially on a Windows PC.

  1. Press alongside hold the Power/Bluetooth® buttons () to the Bluetooth symbol () until you hear “Ready to pair” or the Bluetooth indicator blinks blue.
  2. Turn on Bluetooth on the device and choose your Bose QuietComfort earbuds from the device list.
  3. Bluetooth is typically located in the Settings menu.
  4. OR, if your device supports Bluetooth® pairing via Near Field Communication (NFC):
  5. Slide the headphones to the right to turn them on.
  6. Unlock your device and enable Bluetooth and NFC functionality.
  7. Connect your device’s NFC touchpoint to the NFC touchpoint on your headphones. You may be prompted by your device to accept pairing.

Once associated, you will hear the message “Connected to devise name>” and the Bluetooth light will illuminate solid white.

As long as your Bose earbuds or headphones are in pairing mode, all you need to do is turn on Airplane mode on your Apple Watch, turn on Bluetooth on your Apple watch, and then pair your device with Airplane mode enabled. This should resolve the issue by removing interfering gadgets.

FAQs About Pairing Bose Headphones

How To Fix Bose One Earbuds That Aren’t Working?

Turn off Bluetooth on all devices within 30 feet of the earbuds to avoid interference.
Place the earbuds in the charging case for 5 seconds.
Remove the earphones from their case. Now, the charging case and earphones should function normally.

Why am I unable to connect my Bose wireless headphones to my iPhone?

Remove your Bose product from the Bluetooth® menu in the device settings. Then attempt reconnecting. In the device’s Bluetooth settings, you should see a list of Bluetooth devices that the device has previously connected to. Locate and delete your Bose product from the list.

What is the procedure for resetting Bose Bluetooth headphones?

To clear the product memory of Bluetooth® devices that are connected:
For ten seconds, press and hold the Power/Bluetooth button until the Bluetooth device list is cleared.

Trina Oralde

I'm a tech writer and contributor who covers the latest in gadgets and technology. I keep my finger on the pulse of the tech world, so you don't have to. Stay up-to-date on the latest with me!


Recent Content