How to Connect Bluetooth Headphones to a Laptop?[Easy Steps]


Bluetooth headphone use no cables to connect to your devices.

As a result, it’s natural if you’re experiencing difficulty connecting your Bluetooth headphones to your computer or smartphone.

However, connecting your headphones to any device is simple.

Here a quick answer. Read the whole article for the Step by Step Guide.

How to Connect Bluetooth Headphones to a Laptop?

  1. Make your Bluetooth gadget discoverable by turning it on..
  2. On your Laptop or PC: Choose Start > Settings > Bluetooth & Devices > Add device > Bluetooth
  3. Select the Bluetooth device, then select Done if any additional instructions display.
How to Connect Bluetooth Headphones to a Laptop
How to Connect Bluetooth Headphones to a Laptop

Note: The method you use to make it discoverable is determined by the device. To find out how, look at the device or go to the manufacturer’s website.

When your Bluetooth device and PC are in range of each other and Bluetooth is turned on, they will normally connect immediately.

connect-bluetooth-headphones-to-a-ps4/

Before You Begin

Check that your computer’s audio volume is working. It may be perplexing if you don’t hear any sound through your headphones even after they have been securely connected if the audio is too low or set to mute.

Make sure your smartphone and wireless headphones are no more than three feet apart. The stronger the Bluetooth connection and the easier it is to link them, the closer they are.

Check that both devices are charged. It is not necessary for these devices to be fully charged; simply ensure that they have enough power left so that neither of them shuts down unexpectedly when partnering.

How to Connect Bluetooth Headphones to a Laptop

Before you do anything else, make sure you know how to connect Bluetooth headphones to PC by heart. Knowing how to use it right will save you a lot of hassles, whether it’s for gaming, movies, or casual music listening. Fortunately, unlike when using Bluetooth headphones for TV, connecting your headphones to PC is a rather simple process.

After you’ve confirmed that your Windows 11 PC supports Bluetooth, you must enable it. Here’s how it works:

Select Start > Settings > Bluetooth & devices, and then enable Bluetooth.

To access the Bluetooth quick settings, click the Network icon on the right side of your taskbar, near to the time and date. Turn on Bluetooth by selecting it. It may appear as Not connected if it is turned on without any Bluetooth devices connected.

If Bluetooth isn’t listed in the quick settings, you may need to enable it. See Change notifications and quick settings in Windows 11 for additional information.

1. First, make sure you understand how to set your headphones into Bluetooth pairing mode.

2. On your PC, go to the Start menu and select Settings. It’s the gear-shaped icon to the right of the Power button. You may also access the Settings app by typing “settings” into the Start menu search box.

3. Go to “Devices.”

4. The Devices page should open to the “Bluetooth & other devices” section automatically. If it doesn’t, go to the left pane and select “Bluetooth & other devices.”

5. Ensure that Bluetooth is enabled. If it isn’t, simply click the button until it turns blue.

6. Select Add Bluetooth or other device,” and then select Bluetooth in the Add a device window.

7. Set your Bluetooth headphones to pairing mode.

8. The headphones should appear in the list of devices after a few moments. Click the headphones when you see them.

9. Depending on the headphones, they may connect automatically, or you may need to enter a Bluetooth passcode in Windows. If you notice a passcode request, enter the code from the user guide for the headphones. Most of the time, if a passcode is used at all, it is just 0000. (four zeros).

10. When the connection is complete, a notification will appear indicating that the headphones are now connected to the PC. You can close the Settings window by clicking “Done.”

How to Connect Bluetooth Headphones to a Laptop
How to Connect Bluetooth Headphones to a Laptop

How to Connect Bluetooth Headphones in your Mac

  1. Launch the Apple Menu. The Apple menu is represented by the Apple-shaped icon in the upper left corner of your screen. When you click it, a drop-down menu appears.
  2. Then, select System Preferences.
  3. Then, select Bluetooth.
  4. Check that Bluetooth is enabled on your Mac. On the Bluetooth page, under the symbol on the left side of the screen, it should say “Bluetooth: On.” If it shows “Bluetooth: Off,” click the “Turn Bluetooth On” button below.
  5. Hold down the power button on your headphones. To connect your Bluetooth headphones to your Mac, you must first enable pairing mode on your headphones. Depending on the headphones, this will turn them on and immediately activate the Bluetooth. You may also have headphones with a separate “paring” button. More information can be found in the instructions that came with your headphones.
  6. Finally, click the Connect button next to the name of your headphones. Your headphones’ model number, which could be a series of letters and numbers, may be listed. If you don’t remember the model number, you may always look for the speaker symbol.

If you want to connect your headphones faster the next time, check the box next to “Show Bluetooth in menu bar” in System Preferences’ Bluetooth menu (next to the red arrow in the image above). Then, in the menu bar, click the Bluetooth icon and hover over the name of your headphones. Finally, from the pop-up menu, select Connect.

What if Bluetooth headset is not compatible with Mac?

You do not need to be concerned. If your laptop computer and Bluetooth headphones are working well, there are a few things you should verify before calling customer care.

  1. Check that your Bluetooth headphones are turned on and within range (i.e., you should be sat near your laptop).
  2. Check that your headset is connected to your Mac. This may seem unusual, but your headphones may have been connected to another device. It could perhaps have simply not functioned when you expected it to.
  3. If your headset isn’t listed, reconnect with it again. The second time’s the charm!
  4. Check that your headset is charged. It could be disconnecting because the battery is dead.

Ascertain that your Mac’s audio output is set to headphones. If your Mac is connected to two different Bluetooth audio devices, it may be playing audio from one of them (like your speakers).

What to Do If Your Bluetooth Headphones Won’t Connect to PC

Bluetooth may be the main wireless connection nowadays, but it still has problems when compared to other wireless connectivity choices such as RF and IF. And, before delving deeper into the more intricate causes of Bluetooth failure, it’s a good idea to figure out where the problem is first.

Simply connect your Bluetooth headphones to several devices to accomplish this (like your phones, tablets, etc). And then see if it works. If it doesn’t, it’s safe to assume that the issue is with your Bluetooth headphones. If it does, though, you should investigate your PC.

In any case, we’ve put together some simple instructions on what to do if your Bluetooth headphones won’t connect to your PC.

1. For Bluetooth headphones issues

There are two common causes of headphones-related connection failure. They are as follows:

  1. The battery is running out of power.
  2. The Bluetooth configuration must be reset.

If these aren’t the issues, you’ll need to contact the manufacturer for a warranty replacement or take your headphones to a specialist. However, before proceeding with any additional repairs, it is critical to rule out these two possibilities.

You can also check to see if your Bluetooth headphones are still linked to another device. While some headphones enable more than three multipoint connections, others, such as Sony’s WF-1000XM3, can only connect to two devices at once.

2. Examine the battery

For Bluetooth to function properly, your headphones’ battery must be fully charged; otherwise, you will most likely encounter a problem when attempting to connect your device.

To avoid connectivity issues caused by a low battery level, make sure to fully charge your batteries before using them. Spend some time charging the batteries or replacing them if you have replacements. Then, try pairing the devices once more.

3. Reset your headphones

Changes to your device, such as altering the firmware or installing updates, can have an impact on your headphones’ ability to connect.

Resetting your Bluetooth headphones may be all that is required to correct the issues and get them working properly again.

4. For PC issues

It’s not unusual for your PC to be the cause of your Bluetooth headphones failing to connect.

Because a PC is a sophisticated device that relies on a variety of software and hardware to function, expect the problem to manifest itself in various areas. Here’s a fast approach to resolving Bluetooth connectivity troubles on your PC.

5. Turn on Bluetooth Support Service

Bluetooth Support Service is a Windows service that allows remote Bluetooth devices to be discovered and associated. Stopping this service causes installed Bluetooth devices to fail to function properly.

6. Bluetooth Device Driver Update

A Bluetooth driver is a piece of device-specific software that allows communication between your operating system and a Bluetooth device.

7. Use the Troubleshooter

If you haven’t found a solution after using the above listed repairs, it’s time to use the hardware and device troubleshooter. This will assist you in locating the issue and providing correct solutions to whatever is wrong with your computer.

Final Thoughts on How to Connect Bluetooth Headphones to a Laptop

Bluetooth headphones and bluetooth earbuds can be paired with various devices, including your android phone, iPhone and computer. However, bear in mind that depending on the model of your Bluetooth headphones, you may only be able to connect to one device at a time.

But some bluetooth headphones and computer allow multiple devices to connect. First thing to do is allow bluetooth devices into discoverable mode or pair mode.

If you have difficulties connecting the headphones to your phone after completing this setup, you may need to detach the headphones from the PC or switch off the PC’s Bluetooth if you want to connect to the phone while the computer is still in Bluetooth range.

Frequently Asked Questions (FAQS)

Why isn’t my PC able to connect to my Bluetooth headphones?

Make sure that Airplane mode is turned off. Turn Bluetooth on and off: Select Start, then Settings > Devices > Bluetooth & other devices. Turn off Bluetooth, wait a few seconds, then turn it back on. See Connect a Bluetooth device for more information on pairing your Bluetooth device again.

How can I pair Bluetooth headphones with my Windows 10 laptop?

Check that Bluetooth is turned on.
Add Bluetooth or other device.
In the Add a device window, click Bluetooth.
Wait as your PC or laptop searches for Bluetooth devices nearby.
Click on the name of the device you want to connect to until the PIN code appears.

Why isn’t my laptop recognizing my headphones?

Check that your headphones are correctly connected to your laptop. Right-click the volume icon in the lower left corner of your screen and select Sounds. Select the Playback tab. If your headphones do not appear as a listed device, right-click on the empty spot and select Show Disabled Devices.

Recent Content